AI-generated FDM process illustration; not a photograph of FDM 1000s (Sculpture Use), the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

FDM · Model reference

EverBen FDM 1000s 3D Printer (Sculpture Use): specifications and configuration review

FDM 1000s (Sculpture Use): 1000 mm cube sculpture-oriented filament reference with 0.8–2.0 mm nozzle choices. Surface quality, layer/flow pairing and finishing time need a model-specific trial.

Request this configuration Compare adjacent models ↓

AI-generated FDM process illustration; not a photograph of FDM 1000s (Sculpture Use), the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

Processfilament extrusion / FDM

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for FDM 1000s (Sculpture Use)

Do the larger nozzles establish faster sculpture output?

The table combines 0.8/1.0/1.2/1.5/2.0 mm nozzles with 0.05–0.4 mm layers and 30–350 mm/s speeds. These ranges are not a validated set of simultaneous settings; request sustained melt flow for the selected filament.

What defines an acceptable sculpture-use result?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: 1000×1000×1000mm
Layer setting: 0.05-0.4mm
Nozzle diameter options: 0.8/1.0/1.2/1.5/2.0mm
Material grade / qualification: Not supplied in this reference record — request a configuration-specific value.
Nozzle temperature: Max 310°C
Chamber heating / enclosure: Fully enclosed,double-leaf front door and top door
Electrical supply: AC100V-AC240V 50Hz/60Hz
Rated load (reference; scope to confirm): Not supplied in this reference record — request a configuration-specific value.

Adjacent configurations

Compare FDM 1000s (Sculpture Use) with FDM 1000 (Industrial Use) and FDM 2350

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

FDM 1000s (Sculpture Use) / FDM 1000 (Industrial Use)

Reference comparison; unconfirmed fields remain open
Field	FDM 1000s (Sculpture Use)	FDM 1000 (Industrial Use)
Build envelope	1000×1000×1000mm	1000×1000×1000mm
Nozzle diameter options	0.8/1.0/1.2/1.5/2.0mm	0.3/0.4/0.6/0.8mm
Nozzle temperature	Max 310°C	Max 310°C
Chamber heating / enclosure	Fully enclosed,double-leaf front door and top door	Fully enclosed,double-leaf front door and top door
Machine outline (auxiliaries may be excluded)	1570×1300×1910mm	1570×1300×1910mm
Machine mass (check net/gross basis)	≥550kg	≥550kg

FDM 1000 (Industrial Use): 1000 mm cube filament reference with 0.3/0.4/0.6/0.8 mm nozzle choices. The sculpture variant shares the envelope but lists larger nozzles; chamber and continuous-duty data are missing.

Review FDM 1000 (Industrial Use) specifications →

FDM 1000s (Sculpture Use) / FDM 2350

Reference comparison; unconfirmed fields remain open
Field	FDM 1000s (Sculpture Use)	FDM 2350
Build envelope	1000×1000×1000mm	2350×1000×750mm
Nozzle diameter options	0.8/1.0/1.2/1.5/2.0mm	0.4-1mm (Optional)
Nozzle temperature	Max 310°C	350°C
Chamber heating / enclosure	Fully enclosed,double-leaf front door and top door	Up to 60°C
Machine outline (auxiliaries may be excluded)	1570×1300×1910mm	3420×1920×2150mm
Machine mass (check net/gross basis)	≥550kg	Not supplied in this record

FDM 2350: 2350 × 1000 × 750 mm filament reference with two nozzles, a 350 °C hot-end entry and chamber heating up to 60 °C. Long-travel accuracy and nozzle modes need definition.

Review FDM 2350 specifications →

Reviewed reference record

Basic Parameters for EverBen FDM 1000s 3D Printer (Sculpture Use)

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Build Size: 1000×1000×1000mm
Machine Size: 1570×1300×1910mm
Printing Technology: FDM(Fused Deposition Modeling)
Layer Thickness: 0.05-0.4mm
Positioning Accuracy: ≤0.0125mm
Air Purifier: Yes
Power Loss Recovery: Yes
Filament Run-out Alarm: Yes
Nozzle: 1
Printing Color: Single Color
Printing Speed: 30-350mm/s
Structure: Fully enclosed,double-leaf front door and top door
Filament Supply: Top-down
Lighting: LED
Nozzle Diameter: 0.8/1.0/1.2/1.5/2.0mm
Nozzle Temperature: Max 310°C
Display: 7-inch Touchscreen
CPU: 32-bit ARM CPU microcontroller
Connectivity: USB Drive, LAN (Wi-Fi Transmission)
Power Supply: AC100V-AC240V 50Hz/60Hz
Operation System: Windows, Linux, Mac
File Format: STL, OBJ
Appearance: High-temp baking paint sheet metal
Ambient Temperature: 15°C-32°C
Storage Temperature: 0°C-32°C
Gross Weight: ≥550kg

Needs configuration confirmation

The industrial and sculpture records share the nominal one-metre cube and listed machine outline. The 1000s needs project-specific surface, seam, support-removal, coating and handling criteria before its intended-use label is meaningful. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

AI-generated FDM sample illustration; not a measured sample from FDM 1000s (Sculpture Use). Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for FDM 1000s (Sculpture Use)

Use a representative visible surface and joint from the sculpture, then record print time, sanding/coating effort, seams and final appearance at the chosen nozzle and layer.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

filament extrusion / FDM process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the FDM 1000s (Sculpture Use) configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation