AI-generated FDM process illustration; not a photograph of FDM 345, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

FDM · Model reference

EverBen FDM 345 3D Printer: specifications and configuration review

FDM 345: 425 × 365 × 550 mm FDM reference with a 330 °C nozzle and 120 °C bed entry. Layer thickness lacks a unit, and heated-chamber temperature is unspecified.

Request this configuration Compare adjacent models ↓

AI-generated FDM process illustration; not a photograph of FDM 345, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

Processfilament extrusion / FDM

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for FDM 345

What does the ≥0.05 layer entry mean?

The saved source omits a unit, so the layer range remains pending. A 0.4 mm default nozzle is listed separately and cannot determine the missing unit or validated minimum layer setting.

Does the heated chamber qualify the 500 mm/s claim?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: 425×365×550mm
Layer setting: Pending confirmation — The source ≥0.05 value has no unit. Confirm layer thickness in a controlled specification.
Nozzle diameter options: 0.4mm
Material grade / qualification: Not supplied in this reference record — request a configuration-specific value.
Nozzle temperature: Max 330°C
Chamber heating / enclosure: Fully Enclosed Heated Chamber (Dual-Door Design)
Electrical supply: AC100v-AC240v 50Hz/60Hz
Rated load (reference; scope to confirm): Not supplied in this reference record — request a configuration-specific value.

Adjacent configurations

Compare FDM 345 with FDM 3040 and FDM 500

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

FDM 345 / FDM 3040

Reference comparison; unconfirmed fields remain open
Field	FDM 345	FDM 3040
Build envelope	425×365×550mm	300×300×400mm
Nozzle diameter options	0.4mm	0.4/0.6/0.8/1mm
Nozzle temperature	Max 330°C	0-320°C
Chamber heating / enclosure	Fully Enclosed Heated Chamber (Dual-Door Design)	Fully enclosed (double door type)
Machine outline (auxiliaries may be excluded)	600×550×950mm	530×520×825mm
Machine mass (check net/gross basis)	50KG	48kg

FDM 3040: 300 × 300 × 400 mm FDM reference with misaligned positioning, purifier and nozzle rows plus an unresolved ≤6000 mm/s speed entry. Corrected configuration data is required.

Review FDM 3040 specifications →

FDM 345 / FDM 500

Reference comparison; unconfirmed fields remain open
Field	FDM 345	FDM 500
Build envelope	425×365×550mm	500×500×500mm
Nozzle diameter options	0.4mm	Pending confirmation — see this model’s reference issues
Nozzle temperature	Max 330°C	Pending confirmation — see this model’s reference issues
Chamber heating / enclosure	Fully Enclosed Heated Chamber (Dual-Door Design)	Not supplied in this record
Machine outline (auxiliaries may be excluded)	600×550×950mm	680×640×820mm
Machine mass (check net/gross basis)	50KG	Not supplied in this record

FDM 500: 500 mm cube FDM reference whose nozzle, extruder, temperature and material rows need a corrected source table. No replacement layer range or material identity has been inferred.

Review FDM 500 specifications →

Reviewed reference record

Basic Parameters for EverBen FDM 345 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Build Size: 425×365×550mm
Machine Size: 600×550×950mm
Printing Technology: Fused Deposition Modeling (FDM)
Layer Resolution: Pending confirmation — The source ≥0.05 value has no unit. Confirm layer thickness in a controlled specification.
Air Filtration System: Available
Filament Run-out Alarm: Pause & Alert Supported
Camera: Equipped
Leveling Method: Auto Bed Leveling
Number of Nozzles: 1
Printing Speed: ≤500mm/s
Motion System: CoreXY
Motor Drive Type: TMC2209
Enclosure Structure: Fully Enclosed Heated Chamber (Dual-Door Design)
Filament Storage Box: External Hanging Type
Lighting Function: Built-in LED Lighting
Default Nozzle Diameter: 0.4mm
Nozzle Temperature: Max 330°C
Heated Bed: Max 120°C
Display: 4.5-inch Capacitive Touchscreen
Printing Method: USB Drive, LAN, Wi-Fi
Power Requirements: AC100v-AC240v 50Hz/60Hz
Operating System Support: Windows, Linux,MAC
Supported File Formats: STL, OBJ, GCODE
Machine Surface Finish: High-temperature baked sheet metal coating for a distinctive look
Gross Weight: 50KG
Recommended Operating Temperature: 15°C-32°C
Storage Temperature: 0°C-32°C

Needs configuration confirmation

The enclosure is described as heated without a chamber setpoint or control method. The ≤500 mm/s entry also lacks material, flow and quality conditions; total power and long-duration operating evidence are absent. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

Source wording retained for clarification (1 entries; not approved specifications)

Layer Resolution — pending

Unresolved source wording: ≥0.05

The source ≥0.05 value has no unit. Confirm layer thickness in a controlled specification.

AI-generated FDM sample illustration; not a measured sample from FDM 345. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for FDM 345

Verify the corrected layer range with the 0.4 mm nozzle, then measure chamber uniformity and finished dimensions on a representative 425 × 365 mm layout.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

filament extrusion / FDM process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the FDM 345 configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation