AI-generated FGF process illustration; not a photograph of FGF 2435, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

FGF · Model reference

EverBen FGF 2435 3D Printer: specifications and configuration review

FGF 2435: 3500 × 2400 × 1000 mm pellet build reference with 3–16 mm nozzles, 11000 kg listed mass and 70 kW. Lifting, special motion and machining options need engineering records.

Request this configuration Compare adjacent models ↓

AI-generated FGF process illustration; not a photograph of FGF 2435, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

Processpellet extrusion / FGF

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for FGF 2435

What is the capacity tradeoff against 2420?

The 2435 record increases the horizontal footprint to 3500 × 2400 mm but lists 1000 mm build height versus 1350 mm for 2420. No equivalent-job cycle or finished-part result establishes a production advantage.

Which layout facts are still needed?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: (L*W*H) 3500 * 2400 * 1000mm
Nozzle diameter options: 3-16mm
Material grade / qualification: Pending confirmation — The source material code PEl+CF is ambiguous. Confirm the polymer identity and qualified pellet grades.
Nozzle temperature: ≤450 degrees Celsius
Chamber heating / enclosure: Not supplied in this reference record — request a configuration-specific value.
Electrical supply: 3-phase AC 380V
Rated load (reference; scope to confirm): 70 kW

Adjacent configurations

Compare FGF 2435 with FGF 2420 and FGF 3000H Pro

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

FGF 2435 / FGF 2420

Reference comparison; unconfirmed fields remain open
Field	FGF 2435	FGF 2420
Build envelope	(LWH) 3500 * 2400 * 1000mm	(LWH) 2400 * 2000 * 1350mm
Nozzle diameter options	3-16mm	3-16mm
Nozzle temperature	≤450 degrees Celsius	≤450 degrees Celsius
Machine outline (auxiliaries may be excluded)	(LWH) 7277 * 3906 * 4383 mm	(LWH) 4400 * 4100 * 4700 mm
Machine mass (check net/gross basis)	11000 kg	6000 kg
Rated load (reference; scope to confirm)	70 kW	60 kW

FGF 2420: 2400 × 2000 × 1350 mm pellet reference with 3–16 mm nozzles, 100 kg hopper capacity and a 60 kW entry. Special deposition and machining scope remain unconfirmed.

Review FGF 2420 specifications →

FGF 2435 / FGF 3000H Pro

Reference comparison; unconfirmed fields remain open
Field	FGF 2435	FGF 3000H Pro
Build envelope	(LWH) 3500 * 2400 * 1000mm	(LWH) 300020001000mm
Nozzle diameter options	3-16mm	Pending confirmation — see this model’s reference issues
Nozzle temperature	≤450 degrees Celsius	450°C
Machine outline (auxiliaries may be excluded)	(LWH) 7277 * 3906 * 4383 mm	(LWH) 806040804480mm
Machine mass (check net/gross basis)	11000 kg	Pending confirmation — see this model’s reference issues
Rated load (reference; scope to confirm)	70 kW	70kW

FGF 3000H Pro: 3000 × 2000 × 1000 mm pellet reference with a 70 kW entry and much larger machine outline than 3000 Pro. Nozzle/pellet ranges and hybrid-cell inclusion need resolution.

Review FGF 3000H Pro specifications →

Reviewed reference record

Basic Parameters for EverBen FGF 2435 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Molding technology: Fused granular fabrication
Molding dimensions: (L*W*H) 3500 * 2400 * 1000mm
Dimensions: (L*W*H) 7277 * 3906 * 4383 mm
Optional functions: Pending confirmation — Oblique and vertical deposition are source-listed options with no confirmed motion limits. Machining inclusion also requires an itemized configuration.
Working surface temperature: ≤120 degrees Celsius
Printing bed: Aluminum platform
Optional nozzle diameter: 3-16mm
The highest temperature of the nozzle: ≤450 degrees Celsius
Nozzle heating method: four-zone intelligent heating
Print connection: SD/USB/WiFi
Slicing supported formats: STL/OBJ/AMF/3MF
Compressed air pressure: 0.6MPA
Materials: Pending confirmation — The source material code PEl+CF is ambiguous. Confirm the polymer identity and qualified pellet grades.
Material particle diameter: 1-5 mm
Storage hopper capacity (mass): 100kg
Automatic feeder: (integrated)
Power supply voltage: 3-phase AC 380V
Rated power: 70 kW
Machine weight: 11000 kg

Needs configuration confirmation

The source outline is 7277 × 3906 × 4383 mm with a 100 kg hopper mass-capacity entry. Confirm lifting sections, foundation reactions, pellet density, complete-cell power and the limits of optional oblique or vertical deposition. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

Source wording retained for clarification (2 entries; not approved specifications)

Materials — pending

Unresolved source wording: ABS/ABS Fire Retardant/ABS+GF/ABS+CF/PETG/PETG Fire Retardant/ PETG+GF/PLA/ASA/ASA+GF/TPU/PC/PA/PP/PA+CF/PC+CF/PEl+CF etc.

The source material code PEl+CF is ambiguous. Confirm the polymer identity and qualified pellet grades.

Optional functions — pending

Unresolved source wording: oblique printing, vertical printing function

Oblique and vertical deposition are source-listed options with no confirmed motion limits. Machining inclusion also requires an itemized configuration.

AI-generated FGF sample illustration; not a measured sample from FGF 2435. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for FGF 2435

Validate a long, wide tool across the 3500 mm travel, retaining lifting support, thermal history and measurements after the agreed machining or finishing route.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

pellet extrusion / FGF process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the FGF 2435 configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation