AI-generated FGF process illustration; not a photograph of FGF 3000 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

FGF · Model reference

EverBen FGF 3000 Pro 3D Printer: specifications and configuration review

FGF 3000 Pro: 3000 × 2000 × 1000 mm pellet-extrusion reference with 2–6 mm nozzles and 6000 kg listed mass. CNC ownership and mixed dryer utility entries are unresolved.

Request this configuration Compare adjacent models ↓

AI-generated FGF process illustration; not a photograph of FGF 3000 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

Processpellet extrusion / FGF

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for FGF 3000 Pro

What is known about the 3000 control system?

The source calls the CNC self-developed without naming the developer or product. The public record now leaves developer, version and licence pending. Software identity must also define supported files and parameter access.

Does the dryer row describe complete-cell power?

It combines 100 kg capacity, 6 kW, 2.5 kW, 380 V, 12 A and compressed-air values without component assignments. Request separate dryer heater, motor, air and machine loads with a simultaneous total.

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: (L*W*H) 3000*2000*1000mm
Nozzle diameter options: 2-6mm
Material grade / qualification: PC+ABS/PETG+GF/PP+GF/PA+GF/ABS+GF/PPS/PC/PA etc
Nozzle temperature: ≤350 degrees Celsius (450 degrees Celsius is optional)
Chamber heating / enclosure: Not supplied in this reference record — request a configuration-specific value.
Electrical supply: Three-phase AC 380V
Rated load (reference; scope to confirm): Not supplied in this reference record — request a configuration-specific value.

Adjacent configurations

Compare FGF 3000 Pro with FGF 3000H Pro and FGF 1800 Pro

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

FGF 3000 Pro / FGF 3000H Pro

Reference comparison; unconfirmed fields remain open
Field	FGF 3000 Pro	FGF 3000H Pro
Build envelope	(LWH) 300020001000mm	(LWH) 300020001000mm
Nozzle diameter options	2-6mm	Pending confirmation — see this model’s reference issues
Nozzle temperature	≤350 degrees Celsius (450 degrees Celsius is optional)	450°C
Machine outline (auxiliaries may be excluded)	(LWH) 410430673100mm	(LWH) 806040804480mm
Machine mass (check net/gross basis)	6000kg	Pending confirmation — see this model’s reference issues
Rated load (reference; scope to confirm)	Not supplied in this record	70kW

FGF 3000H Pro: 3000 × 2000 × 1000 mm pellet reference with a 70 kW entry and much larger machine outline than 3000 Pro. Nozzle/pellet ranges and hybrid-cell inclusion need resolution.

Review FGF 3000H Pro specifications →

FGF 3000 Pro / FGF 1800 Pro

Reference comparison; unconfirmed fields remain open
Field	FGF 3000 Pro	FGF 1800 Pro
Build envelope	(LWH) 300020001000mm	Pending confirmation — see this model’s reference issues
Nozzle diameter options	2-6mm	1-8mm
Nozzle temperature	≤350 degrees Celsius (450 degrees Celsius is optional)	≤350 degrees Celsius (450 degrees Celsius is optional)
Chamber heating / enclosure	Not supplied in this record	Option
Machine outline (auxiliaries may be excluded)	(LWH) 410430673100mm	(LWH) 265020002300mm
Machine mass (check net/gross basis)	6000kg	1300kg
Rated load (reference; scope to confirm)	Not supplied in this record	Pending confirmation — see this model’s reference issues

FGF 1800 Pro: FGF 1800 has conflicting build-height records, a 50 kg hopper-capacity entry and 1–8 mm nozzle options. The 3–10 kW load range needs a thermal configuration.

Review FGF 1800 Pro specifications →

Reviewed reference record

Basic Parameters for EverBen FGF 3000 Pro 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Molding technology: Fused granular fabrication
Molding dimensions: (L*W*H) 3000*2000*1000mm
Machine dimensions: (L*W*H) 4104*3067*3100mm
Optional nozzle diameter: 2-6mm
Nozzle heating method: Three-zone intelligent heating
Control System: Pending confirmation — The software developer, product, licence and version are unnamed; development ownership is not established.
Drive mode: Servo motor
Machine weight: 6000kg
The maximum temperature of the nozzle: ≤350 degrees Celsius (450 degrees Celsius is optional)
Printing connection method: SD/USB/WiFi
Slicing supported formats: STL/OBJ/AMF/3MF/STP/STEP
Slicing software: Source-listed machine-control or slicing software; current product name, licence, provider, version and compatibility must be confirmed in the controlled quotation.
Materials: PC+ABS/PETG+GF/PP+GF/PA+GF/ABS+GF/PPS/PC/PA etc
Material particle diameter: 1-5mm
Automatic feeder: Integrated
Granular dryer: Pending confirmation — The dryer row mixes 100 kg, 6 kW, 2.5 kW, 380 V, 12 A and air demand without component boundaries. Request separate capacity and utility rows plus total-cell load.
Power supply voltage: Three-phase AC 380V

Needs configuration confirmation

It combines 100 kg capacity, 6 kW, 2.5 kW, 380 V, 12 A and compressed-air values without component assignments. Request separate dryer heater, motor, air and machine loads with a simultaneous total. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

Source wording retained for clarification (2 entries; not approved specifications)

Control System — pending

Unresolved source wording: Self-developed new generation CNC system

The software developer, product, licence and version are unnamed; development ownership is not established.

Granular dryer — pending

Unresolved source wording: 100kg tank, 6kW, 2.5kW, Three-phase AC 380V±7%, 12A, 50/60Hz, 0.6MPa, 200liters/minute

The dryer row mixes 100 kg, 6 kW, 2.5 kW, 380 V, 12 A and air demand without component boundaries. Request separate capacity and utility rows plus total-cell load.

AI-generated FGF sample illustration; not a measured sample from FGF 3000 Pro. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for FGF 3000 Pro

Run the intended large tool using its pellet, drying cycle, nozzle and machining allowance; report sustained deposition and final dimensions after cooling and finishing.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

pellet extrusion / FGF process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the FGF 3000 Pro configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation