AI-generated SLM process illustration; not a photograph of SLM M150G, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

SLM · Model reference

EverBen SLM M150G 3D Printer: specifications and configuration review

SLM M150G: 150 × 150 × 150 mm green-laser LPBF reference with up to 200 °C plate heating. The source-described 500 W laser lacks a model and wavelength.

Request this configuration Compare adjacent models ↓

AI-generated SLM process illustration; not a photograph of SLM M150G, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

Processmetal LPBF / SLM

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for SLM M150G

What distinguishes M150G from M150D?

M150G explicitly describes a green laser and a dual-cylinder single-feeding system; M150D lists 1064 nm single/dual laser candidates and upward feeding. Neither list establishes the material performance of the other route.

Which evidence is missing for copper and gold?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: 150 × 150 × 150mm
Layer setting: 0.02mm~0.1mm
Laser: 500W IPG Green Single-Mode Fiber Laser (500W)
Material grade / qualification: Red copper, copper alloys, refractory metals, gold, aluminum alloys, etc.
Electrical supply: 220V 50Hz 10kW
Rated load (reference; scope to confirm): 220V 50Hz 10kW
Preheat / process temperature: Up to 200°C (with integrated piston water cooling)

Adjacent configurations

Compare SLM M150G with SLM M150D and SLM M300G

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

SLM M150G / SLM M150D

Reference comparison; unconfirmed fields remain open
Field	SLM M150G	SLM M150D
Build envelope	150 × 150 × 150mm	150mm150mm150mm
Laser	500W IPG Green Single-Mode Fiber Laser (500W)	IPG 500W×1/2 (1064nm)
Preheat / process temperature	Up to 200°C (with integrated piston water cooling)	200°C
Machine outline (auxiliaries may be excluded)	1280 × 860 × 1780mm	1300mm930mm2150mm
Machine mass (check net/gross basis)	Not supplied in this record	830kg
Electrical supply	220V 50Hz 10kW	Pending confirmation — see this model’s reference issues
Rated load (reference; scope to confirm)	220V 50Hz 10kW	Not supplied in this record

SLM M150D: 150 mm cube LPBF reference with 200 °C substrate heating and a listed filtration cabinet. Single/dual laser options and the combined 8.8 kW supply entry need pairing.

Review SLM M150D specifications →

SLM M150G / SLM M300G

Reference comparison; unconfirmed fields remain open
Field	SLM M150G	SLM M300G
Build envelope	150 × 150 × 150mm	Pending confirmation — see this model’s reference issues
Laser	500W IPG Green Single-Mode Fiber Laser (500W)	500W IPG Green Single-Mode Fiber Laser (500W)
Preheat / process temperature	Up to 200°C (with integrated piston water cooling)	Up to 200°C (with integrated piston water cooling)
Machine outline (auxiliaries may be excluded)	1280 × 860 × 1780mm	2460 × 1300 × 2400mm
Electrical supply	220V 50Hz 10kW	380V 50Hz 14kW
Rated load (reference; scope to confirm)	220V 50Hz 10kW	380V 50Hz 14kW

SLM M300G: M300G combines a disputed build envelope with a source-described 500 W green laser. Confirm the light-source identity, wavelength and copper process before dimensional or material selection.

Review SLM M300G specifications →

Reviewed reference record

Basic Parameters for EverBen SLM M150G 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Build Size: 150 × 150 × 150mm
External Dimensions (L*W*H): 1280 × 860 × 1780mm
Layer Thickness: 0.02mm~0.1mm
Laser Power: 500W IPG Green Single-Mode Fiber Laser (500W)
Scanning Speed: Max 7m/s
Scanning System: High-Precision Galvanometer Scanner
Feeding Method: Dual-cylinder, Single-feeding Powder System
Data Format: STL Files or Other Convertible Formats
Display: 17.3-inch Monitor
Filtration system: Standard Filtration Unit
Build Plate Heating: Up to 200°C (with integrated piston water cooling)
Power Supply & Consumption: 220V 50Hz 10kW
Ambient Temperature: Operating Temperature 15~30°C
Materials: Red copper, copper alloys, refractory metals, gold, aluminum alloys, etc.

Needs configuration confirmation

The material list spans copper, gold, aluminium and refractory metals, while the source identifies the laser only as 500 W IPG Green. Obtain wavelength, powder grade, parameter package, atmosphere and alloy-specific test reports. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

AI-generated SLM sample illustration; not a measured sample from SLM M150G. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for SLM M150G

Use coupons within the 150 mm cube to document the selected copper or precious-metal route, including conductivity where relevant, density, finish and repeat builds.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

metal LPBF / SLM process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the SLM M150G configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation