AI-generated SLM process illustration; not a photograph of SLM M650 Series, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

SLM · Series reference

EverBen SLM M650 Series 3D Printer: specifications and configuration review

SLM M650 Series: M650 has conflicting build-height records and four/eight 500 W laser options. The shared 21 kW and 50–100 cm³/h figures cannot define a quoted variant.

Request this configuration Compare adjacent models ↓

AI-generated SLM process illustration; not a photograph of SLM M650 Series, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

Processmetal LPBF / SLM

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for SLM M650 Series

Which height and laser architecture will be quoted?

The saved table lists 625 × 625 × 650 mm while other source records differ in height. Four and eight lasers also appear as alternatives. Require one controlled envelope, scan-zone drawing and utility row per offered configuration.

What must support the 18-tonne installation entry?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: Pending confirmation — Source records contain different build envelopes. A dated drawing must resolve the usable dimensions and revision.
Layer setting: 0.02~0.1mm
Laser: IPG 500W×4/8 (1064nm)
Material grade / qualification: Stainless Steel, Cobalt-Chromium Alloy, Titanium Alloy, Tool Steel, Aluminum Alloy, High-Temperature Alloy
Electrical supply: 380V 50/60 Hz
Rated load (reference; scope to confirm): Pending confirmation — Power and output figures are not mapped to the laser configuration, alloy and parameter package. Confirm a separate row for each quoted variant.
Preheat / process temperature: RT+20°C~100°C

Adjacent configurations

Compare SLM M650 Series with SLM M500 Series and SLM M450Pro-X

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

SLM M650 Series / SLM M500 Series

Reference comparison; unconfirmed fields remain open
Field	SLM M650 Series	SLM M500 Series
Build envelope	Pending confirmation — see this model’s reference issues	Pending confirmation — see this model’s reference issues
Laser	IPG 500W×4/8 (1064nm)	IPG 500W×4 (1064nm)
Preheat / process temperature	RT+20°C~100°C	RT+20°C~80°C
Machine outline (auxiliaries may be excluded)	5500mm4750mm5490mm	2040mm1450mm2170mm
Machine mass (check net/gross basis)	18000kg	2000kg
Electrical supply	380V 50/60 Hz	380V 50 Hz
Rated load (reference; scope to confirm)	Pending confirmation — see this model’s reference issues	15kW, Three-phase Electricity

SLM M500 Series: M500 lists four 500 W lasers, but its build envelope conflicts across source records. A malformed jump-speed range is also pending before configuration comparison.

Review SLM M500 Series specifications →

SLM M650 Series / SLM M450Pro-X

Reference comparison; unconfirmed fields remain open
Field	SLM M650 Series	SLM M450Pro-X
Build envelope	Pending confirmation — see this model’s reference issues	450mm450mm500mm
Laser	IPG 500W×4/8 (1064nm)	Pending confirmation — see this model’s reference issues
Preheat / process temperature	RT+20°C~100°C	RT+20°C~80°C
Machine outline (auxiliaries may be excluded)	5500mm4750mm5490mm	4500mm1800mm3000mm (Main Unit Dimensions Only)
Machine mass (check net/gross basis)	18000kg	Pending confirmation — see this model’s reference issues
Electrical supply	380V 50/60 Hz	380V 50/60 Hz
Rated load (reference; scope to confirm)	Pending confirmation — see this model’s reference issues	15kW, Three-phase Electricity

SLM M450Pro-X: 450 × 450 × 500 mm LPBF build reference with unresolved laser/scanner row conflicts. The reported 10205 kg mass also needs a confirmed equipment boundary.

Review SLM M450Pro-X specifications →

Reviewed reference record

Basic Parameters for EverBen SLM M650 Series 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Build Size: Pending confirmation — Source records contain different build envelopes. A dated drawing must resolve the usable dimensions and revision.
External Dimensions: 5500mm*4750mm*5490mm
Forming Materials: Stainless Steel, Cobalt-Chromium Alloy, Titanium Alloy, Tool Steel, Aluminum Alloy, High-Temperature Alloy
Powder Supply Method: Top Powder Feeding & Two-Way Powder Feeding
Printing Accuracy: Pending confirmation — The fixed term in the source accuracy formula has no unit. A signed formula and measurement method are required.
Layer Thickness: 0.02~0.1mm
Protection System: Efficient Protective Gas Circulation System (Nitrogen, Argon)
Supporting Consumables: Stainless Steel Powder 316L, no less than 200kg, with various material process parameter packages
Laser Type: IPG 500W×4/8 (1064nm)
Scanning System: SCANLAB*4/8 (Equipped with F-theta Field Lens)
Laser Speed: Scanning:1.0~4.0m/s (Recommended); Jumping: 5~7m/s(Recommended); Up to 15m/s
Data Processing Software: Voxeldance Additive (STL file)
Equipment Control Software: Source-listed machine-control or slicing software; current product name, licence, provider, version and compatibility must be confirmed in the controlled quotation.
Operating System: Windows 7 and above
Data Format: STL/SLC/JOB
Power Supply: 380V 50/60 Hz
Rated Power Consumption: Pending confirmation — Power and output figures are not mapped to the laser configuration, alloy and parameter package. Confirm a separate row for each quoted variant.
Preheat Temperature: RT+20°C~100°C
Industrial Control Computer Configuration: Gen i7, 16GB RAM
Forming Efficiency: Pending confirmation — Power and output figures are not mapped to the laser configuration, alloy and parameter package. Confirm a separate row for each quoted variant.
Relative Humidity: Below 40%, Frost-free
Ambient Temperature: 15-30 °C
Equipment Weight: 18000kg

Needs configuration confirmation

The listed outer outline is 5500 × 4750 × 5490 mm and equipment mass 18000 kg. Shipping splits, lifting sequence, foundation reactions, maintenance height and auxiliary inclusion are not established by those two entries. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

Source wording retained for clarification (5 entries; not approved specifications)

Printing Accuracy — pending

Unresolved source wording: ±0.1(L≤100 mm);±0.1%*L(L>100 mm)

The fixed term in the source accuracy formula has no unit. A signed formula and measurement method are required.

Build Size — pending

Unresolved source wording: 625mm*625mm*650mm

Source records contain different build envelopes. A dated drawing must resolve the usable dimensions and revision.

Build envelope — pending

Unresolved source wording: 625mm*625mm*650mm

Source records contain different build envelopes. A dated drawing must resolve the usable dimensions and revision.

Rated Power Consumption — pending

Unresolved source wording: 21kW, Three-phase Electricity

Power and output figures are not mapped to the laser configuration, alloy and parameter package. Confirm a separate row for each quoted variant.

Forming Efficiency — pending

Unresolved source wording: 50~100cm³/h

Power and output figures are not mapped to the laser configuration, alloy and parameter package. Confirm a separate row for each quoted variant.

AI-generated SLM sample illustration; not a measured sample from SLM M650 Series. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for SLM M650 Series

After configuration approval, test each laser zone and overlap region across the confirmed build height, retaining thermal history, alloy properties and full batch-cycle evidence.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

metal LPBF / SLM process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the SLM M650 Series configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation