AI-generated FDM process illustration; not a photograph of FDM 160, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

FDM · Model reference

EverBen FDM 160 3D Printer: specifications and configuration review

FDM 160: 160 × 160 × 190 mm FDM reference explicitly listed as not fully enclosed, with one nozzle. Its AC100–240 V / 50–60 Hz supply is now included in coverage.

Request this configuration Compare adjacent models ↓

AI-generated FDM process illustration; not a photograph of FDM 160, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

Processfilament extrusion / FDM

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for FDM 160

Does the picture show the FDM 160 enclosure?

The shared FDM image is an AI process illustration and does not depict this model. The reference table describes FDM 160 as not fully enclosed with one nozzle, so an enclosed dual-extrusion appearance must not be inferred.

What can this compact record establish?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: 160×160×190mm
Layer setting: 0.05-0.3mm
Nozzle diameter options: 0.2/0.3/0.4/0.6mm
Material grade / qualification: Not supplied in this reference record — request a configuration-specific value.
Nozzle temperature: Max 260°C
Chamber heating / enclosure: Not fully enclosed
Electrical supply: AC100v-AC240v 50Hz/60Hz
Rated load (reference; scope to confirm): Not supplied in this reference record — request a configuration-specific value.

Adjacent configurations

Compare FDM 160 with FDM 220 and FDM 334

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

FDM 160 / FDM 220

Reference comparison; unconfirmed fields remain open
Field	FDM 160	FDM 220
Build envelope	160×160×190mm	220×220×250mm
Nozzle diameter options	0.2/0.3/0.4/0.6mm	0.4mm
Nozzle temperature	Max 260°C	Max 330°C
Chamber heating / enclosure	Not fully enclosed	Fully Enclosed Constant-Temperature Chamber (Dual-swing Door Design)
Machine outline (auxiliaries may be excluded)	317×366×398mm	402×420×543mm
Machine mass (check net/gross basis)	≥12kg	≥25kg

FDM 220: 220 × 220 × 250 mm FDM reference with a 330 °C nozzle and 120 °C bed entry. Constant-temperature chamber wording lacks a setpoint or control specification.

Review FDM 220 specifications →

FDM 160 / FDM 334

Reference comparison; unconfirmed fields remain open
Field	FDM 160	FDM 334
Build envelope	160×160×190mm	300×300×400mm
Nozzle diameter options	0.2/0.3/0.4/0.6mm	0.4mm
Nozzle temperature	Max 260°C	Max 330°C
Chamber heating / enclosure	Not fully enclosed	Pending confirmation — see this model’s reference issues
Machine outline (auxiliaries may be excluded)	317×366×398mm	460×460×760mm
Machine mass (check net/gross basis)	≥12kg	≥50kg

FDM 334: 300 × 300 × 400 mm filament reference with conflicting enclosure and speed descriptions. Treat structure and operating speed as pending when comparing with FDM 3040.

Review FDM 334 specifications →

Reviewed reference record

Basic Parameters for EverBen FDM 160 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Build Size: 160×160×190mm
Machine Size: 317×366×398mm
Printing Technology: FDM
Layer Resolution: 0.05-0.3mm
Positioning Accuracy: ≤0.0125mm
Air Purifier: Yes
Power Loss Recovery: Yes
Material Run-out Alarm: Yes
Nozzle: 1
Printing Color: Single color
Printing Speed: 30-150mm/s
Structure: Not fully enclosed
Filament Supply: Top-down
Lighting: LED
Nozzle Diameter: 0.2/0.3/0.4/0.6mm
Nozzle Temperature: Max 260°C
Display: 3.5-inch touchscreen
CPU: 32-bit ARM CPU microcontroller
Connectivity: SD card, USB connection
Power Supply: AC100v-AC240v 50Hz/60Hz
Operation System: Windows 7, Linux, Windows XP
File Format: STL, GCODE, OBJ
Appearance: High-temp baking paint frame
Ambient Temperature: 15°C-32°C
Storage Temperature: 0°C-32°C
Gross Weight: ≥12kg

Needs configuration confirmation

The table lists 0.2/0.3/0.4/0.6 mm nozzles, a 260 °C maximum nozzle and a 30–150 mm/s range. It supplies voltage and frequency but no material grades, bed temperature, power load or industrial duty qualification. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

AI-generated FDM sample illustration; not a measured sample from FDM 160. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for FDM 160

Use the intended small fixture within the 160 × 160 × 190 mm envelope, measuring finished dimensions under the actual open-enclosure environment.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

filament extrusion / FDM process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the FDM 160 configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation