AI-generated FDM process illustration; not a photograph of FDM 6610, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

FDM · Model reference

EverBen FDM 6610 3D Printer: specifications and configuration review

FDM 6610: 600 × 600 × 1000 mm filament reference with 0.4/0.6/0.8 mm nozzles and a 300 kg net-mass entry. Legacy operating-system support and tall-part thermal behaviour need confirmation.

Request this configuration Compare adjacent models ↓

AI-generated FDM process illustration; not a photograph of FDM 6610, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

Processfilament extrusion / FDM

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for FDM 6610

What must be clarified about Windows XP and 7?

The source lists Windows 7, Linux and Windows XP under Operation System without distinguishing host software from machine control. Request the supported host, controller, slicer and update versions; the nozzle-temperature label typo is corrected.

What must be proven for a 1000 mm-tall part?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: 600×600×1000mm
Layer setting: 0.05-0.3mm
Nozzle diameter options: 0.4/0.6/0.8mm
Material grade / qualification: Not supplied in this reference record — request a configuration-specific value.
Nozzle temperature: 0-320°C
Chamber heating / enclosure: Not supplied in this reference record — request a configuration-specific value.
Electrical supply: AC100V-AC240V 50Hz/60Hz
Rated load (reference; scope to confirm): Not supplied in this reference record — request a configuration-specific value.

Adjacent configurations

Compare FDM 6610 with FDM 1000 (Industrial Use) and FDM 5060

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

FDM 6610 / FDM 1000 (Industrial Use)

Reference comparison; unconfirmed fields remain open
Field	FDM 6610	FDM 1000 (Industrial Use)
Build envelope	600×600×1000mm	1000×1000×1000mm
Nozzle diameter options	0.4/0.6/0.8mm	0.3/0.4/0.6/0.8mm
Nozzle temperature	0-320°C	Max 310°C
Chamber heating / enclosure	Not supplied in this record	Fully enclosed,double-leaf front door and top door
Machine outline (auxiliaries may be excluded)	930×1200×1670mm	1570×1300×1910mm
Machine mass (check net/gross basis)	300kg	≥550kg

FDM 1000 (Industrial Use): 1000 mm cube filament reference with 0.3/0.4/0.6/0.8 mm nozzle choices. The sculpture variant shares the envelope but lists larger nozzles; chamber and continuous-duty data are missing.

Review FDM 1000 (Industrial Use) specifications →

FDM 6610 / FDM 5060

Reference comparison; unconfirmed fields remain open
Field	FDM 6610	FDM 5060
Build envelope	600×600×1000mm	500×500×600mm
Nozzle diameter options	0.4/0.6/0.8mm	0.4/0.6/0.8/1mm
Nozzle temperature	0-320°C	0-320°C
Chamber heating / enclosure	Not supplied in this record	Fully enclosed (double door type)
Machine outline (auxiliaries may be excluded)	930×1200×1670mm	680 × 730 × 1210mm
Machine mass (check net/gross basis)	300kg	130kg

FDM 5060: 500 × 500 × 600 mm enclosed FDM reference with 0.4–1.0 mm nozzle choices. The fine XY/Z positioning entries and 600 mm/s ceiling lack measurement and flow conditions.

Review FDM 5060 specifications →

Reviewed reference record

Basic Parameters for EverBen FDM 6610 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Build Size: 600×600×1000mm
Machine Size: 930×1200×1670mm
Printing Technology: Fused Deposition Modeling (FDM)
Layer Resolution: 0.05-0.3mm
Positioning Accuracy: ≤0.0125mm
Power Loss Recovery: Yes
Number of Nozzle(s): 1
Printing Color: Single color
Printing Speed: 30-300mm/s
Filament Supply: Top-down
Lighting: LED
Nozzle Diameter: 0.4/0.6/0.8mm
Nozzle Temperature: 0-320°C
Display: 7-inch touchscreen
CPU: 32-bit ARM CPU microcontroller
Servo Motor: Industrial Grade Servo Motor
Transmission Device: Industrial Grade Rail Module
Z axis: Four-axis linkage
Connectivity: SD card (offline), Online
Power Supply: AC100V-AC240V 50Hz/60Hz
Operation System: Windows 7, Linux, Windows XP
File Format: STL, GCODE, OBJ
Appearance: High-temp baking paint sheet metal
Ambient Temperature: 15°C-32°C
Storage Temperature: 0°C-32°C
Net Weight: 300kg

Needs configuration confirmation

The 930 × 1200 × 1670 mm machine outline and listed industrial servo/rail components do not establish chamber stability or long-build reliability. Bed/chamber temperatures, filament grades and sustained flow remain absent. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

AI-generated FDM sample illustration; not a measured sample from FDM 6610. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for FDM 6610

Run a full-height 1000 mm reference part, recording temperatures, pauses, material condition and dimensional drift from bottom to top.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

filament extrusion / FDM process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the FDM 6610 configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation