AI-generated FGF process illustration; not a photograph of FGF 1200 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

FGF · Model reference

EverBen FGF 1200 Pro 3D Printer: specifications and configuration review

FGF 1200 Pro: 1200 × 1000 × 1000 mm pellet build reference with 2–6 mm nozzles and a 40 kg hopper-capacity entry. A major machine-weight discrepancy blocks installation sizing.

Request this configuration Compare adjacent models ↓

AI-generated FGF process illustration; not a photograph of FGF 1200 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

Processpellet extrusion / FGF

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for FGF 1200 Pro

Why is the 1200 machine weight pending?

The saved table gives 90 kg despite a 1990 × 1895 × 2250 mm machine outline, and other records disagree. No replacement mass has been inferred; request net, transport and filled operating weights plus lifting drawings.

Does 40 kg describe hopper volume?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: (L*W*H) 1200*1000*1000mm
Nozzle diameter options: 2-6mm
Material grade / qualification: Pending confirmation — The source material code PEl+CF is ambiguous. Confirm the polymer identity and qualified pellet grades.
Nozzle temperature: ≤350 degrees Celsius (450 degrees Celsius is optional)
Chamber heating / enclosure: Not supplied in this reference record — request a configuration-specific value.
Electrical supply: Single-phase AC 220V
Rated load (reference; scope to confirm): 3-5kW

Adjacent configurations

Compare FGF 1200 Pro with FGF 800 Pro and FGF 1800 Pro

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

FGF 1200 Pro / FGF 800 Pro

Reference comparison; unconfirmed fields remain open
Field	FGF 1200 Pro	FGF 800 Pro
Build envelope	(LWH) 120010001000mm	(LWH) 800600800mm
Nozzle diameter options	2-6mm	0.4-2mm
Nozzle temperature	≤350 degrees Celsius (450 degrees Celsius is optional)	≤350 degrees Celsius (450 degrees Celsius is optional)
Chamber heating / enclosure	Not supplied in this record	Option
Machine outline (auxiliaries may be excluded)	(LWH) 199018952250mm	(LWH) 150011201740mm
Machine mass (check net/gross basis)	Pending confirmation — see this model’s reference issues	Pending confirmation — see this model’s reference issues
Rated load (reference; scope to confirm)	3-5kW	4.6kW

FGF 800 Pro: 800 × 600 × 800 mm pellet-extrusion reference with 350 °C standard and 450 °C optional nozzle entries. Weight and the ambiguous PEl+CF material code remain pending.

Review FGF 800 Pro specifications →

FGF 1200 Pro / FGF 1800 Pro

Reference comparison; unconfirmed fields remain open
Field	FGF 1200 Pro	FGF 1800 Pro
Build envelope	(LWH) 120010001000mm	Pending confirmation — see this model’s reference issues
Nozzle diameter options	2-6mm	1-8mm
Nozzle temperature	≤350 degrees Celsius (450 degrees Celsius is optional)	≤350 degrees Celsius (450 degrees Celsius is optional)
Chamber heating / enclosure	Not supplied in this record	Option
Machine outline (auxiliaries may be excluded)	(LWH) 199018952250mm	(LWH) 265020002300mm
Machine mass (check net/gross basis)	Pending confirmation — see this model’s reference issues	1300kg
Rated load (reference; scope to confirm)	3-5kW	Pending confirmation — see this model’s reference issues

FGF 1800 Pro: FGF 1800 has conflicting build-height records, a 50 kg hopper-capacity entry and 1–8 mm nozzle options. The 3–10 kW load range needs a thermal configuration.

Review FGF 1800 Pro specifications →

Reviewed reference record

Basic Parameters for EverBen FGF 1200 Pro 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Molding technology: Fused granular fabrication
Molding dimensions: (L*W*H) 1200*1000*1000mm
Machine dimensions: (L*W*H) 1990*1895*2250mm
Optional nozzle diameter: 2-6mm
Nozzle heating method: Three-zone intelligent heating
Storage hopper capacity (mass): 40kg
Drive mode: Servo motor
Rated power: 3-5kW
Machine weight: Pending confirmation — The source 90 kg value conflicts with other weight records. Obtain transport mass, operating mass, centre of gravity and lifting drawings.
Working surface temperature: ≤120 degrees Celsius
Workbench contact surface: Aluminum, Composite Plastic, Glass
The maximum temperature of the nozzle: ≤350 degrees Celsius (450 degrees Celsius is optional)
Printing connection method: SD/USB/WiFi
Slicing supported formats: STL/OBJ/AMF/3MF
Compressed air pressure: 0.6MPA
Materials: Pending confirmation — The source material code PEl+CF is ambiguous. Confirm the polymer identity and qualified pellet grades.
Material particle diameter: 1-5mm
Automatic feeder: Integrated
Power supply voltage: Single-phase AC 220V

Needs configuration confirmation

It is now labelled hopper capacity by mass. Pellet bulk density and the usable fill level are unstated, so it cannot be converted to litres. The 3–5 kW and 350/450 °C entries also need the selected thermal package. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

Source wording retained for clarification (2 entries; not approved specifications)

Materials — pending

Unresolved source wording: ABS/ABS Fire Retardant/ABS+GF/ABS+CF/PETG/PETG Fire Retardant/ PETG+GF/PLA/ASA/ASA+GF/TPU/PC/PA/PP/PA+CF/PC+CF/PEl+CF etc.

The source material code PEl+CF is ambiguous. Confirm the polymer identity and qualified pellet grades.

Machine weight — pending

Unresolved source wording: 90kg

The source 90 kg value conflicts with other weight records. Obtain transport mass, operating mass, centre of gravity and lifting drawings.

AI-generated FGF sample illustration; not a measured sample from FGF 1200 Pro. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for FGF 1200 Pro

Use a one-metre-class mold or fixture to record sustained 2–6 mm nozzle output, pellet drying, cooling distortion and any finishing allowance.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

pellet extrusion / FGF process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the FGF 1200 Pro configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation