AI-generated FGF process illustration; not a photograph of FGF 800 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

FGF · Model reference

EverBen FGF 800 Pro 3D Printer: specifications and configuration review

FGF 800 Pro: 800 × 600 × 800 mm pellet-extrusion reference with 350 °C standard and 450 °C optional nozzle entries. Weight and the ambiguous PEl+CF material code remain pending.

Request this configuration Compare adjacent models ↓

AI-generated FGF process illustration; not a photograph of FGF 800 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

Processpellet extrusion / FGF

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for FGF 800 Pro

Which thermal features are standard on 800 Pro?

The source describes a 350 °C nozzle limit with a 450 °C option, a work surface up to 120 °C and optional chamber heating without a chamber temperature. These cannot be combined into an assumed high-temperature package.

What separates this record from 800HT?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: (L*W*H) 800*600*800mm
Nozzle diameter options: 0.4-2mm
Material grade / qualification: Pending confirmation — The source material code PEl+CF is ambiguous. Confirm the polymer identity and qualified pellet grades.
Nozzle temperature: ≤350 degrees Celsius (450 degrees Celsius is optional)
Chamber heating / enclosure: Option
Electrical supply: Single-phase AC 220V
Rated load (reference; scope to confirm): 4.6kW

Adjacent configurations

Compare FGF 800 Pro with FGF 800HT and FGF 1200 Pro

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

FGF 800 Pro / FGF 800HT

Reference comparison; unconfirmed fields remain open
Field	FGF 800 Pro	FGF 800HT
Build envelope	(LWH) 800600800mm	(LWH) 800600800mm
Nozzle diameter options	0.4-2mm	Pending confirmation — see this model’s reference issues
Nozzle temperature	≤350 degrees Celsius (450 degrees Celsius is optional)	≤450°C
Chamber heating / enclosure	Option	Chamber temperature up to 100°C
Machine outline (auxiliaries may be excluded)	(LWH) 150011201740mm	(LWH) 163011251735mm
Machine mass (check net/gross basis)	Pending confirmation — see this model’s reference issues	350kg
Rated load (reference; scope to confirm)	4.6kW	10.6kW

FGF 800HT: 800 × 600 × 800 mm HT pellet reference with a 450 °C nozzle limit, chamber up to 100 °C and 10.6 kW entry. Nozzle range and supply current need confirmation.

Review FGF 800HT specifications →

FGF 800 Pro / FGF 1200 Pro

Reference comparison; unconfirmed fields remain open
Field	FGF 800 Pro	FGF 1200 Pro
Build envelope	(LWH) 800600800mm	(LWH) 120010001000mm
Nozzle diameter options	0.4-2mm	2-6mm
Nozzle temperature	≤350 degrees Celsius (450 degrees Celsius is optional)	≤350 degrees Celsius (450 degrees Celsius is optional)
Chamber heating / enclosure	Option	Not supplied in this record
Machine outline (auxiliaries may be excluded)	(LWH) 150011201740mm	(LWH) 199018952250mm
Machine mass (check net/gross basis)	Pending confirmation — see this model’s reference issues	Pending confirmation — see this model’s reference issues
Rated load (reference; scope to confirm)	4.6kW	3-5kW

FGF 1200 Pro: 1200 × 1000 × 1000 mm pellet build reference with 2–6 mm nozzles and a 40 kg hopper-capacity entry. A major machine-weight discrepancy blocks installation sizing.

Review FGF 1200 Pro specifications →

Reviewed reference record

Basic Parameters for EverBen FGF 800 Pro 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Molding technology: Fused granular fabrication
Molding dimensions: (L*W*H) 800*600*800mm
Machine dimensions: (L*W*H) 1500*1120*1740mm
Optional nozzle diameter: 0.4-2mm
Nozzle heating method: Two-zone intelligent heating
Drive mode: Stepper + servo motor
Rated power: 4.6kW
Machine weight: Pending confirmation — Public records give different weights. Confirm transport and operating mass for the standard or high-temperature package.
Working surface temperature: ≤120 degrees Celsius
Workbench contact surface: PEI/Aluminum/Composite Plastic/Glass
The maximum temperature of the nozzle: ≤350 degrees Celsius (450 degrees Celsius is optional)
Printing connection method: SD/USB/Wi-Fi
Slicing supported formats: STL/OBJ/AMF/3MF/STP/STEP
Compressed air pressure: 0.6MPa
Materials: Pending confirmation — The source material code PEl+CF is ambiguous. Confirm the polymer identity and qualified pellet grades.
Material particle diameter: 1-5mm
Automatic feeder: Integrated
Chamber heating: Option
Power supply voltage: Single-phase AC 220V

Needs configuration confirmation

800 Pro lists 4.6 kW and stepper plus servo drive; 800HT lists 10.6 kW, servo drive and a chamber up to 100 °C. The ordinary model has a weight discrepancy, and each thermal package needs a qualified pellet list. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

Source wording retained for clarification (2 entries; not approved specifications)

Materials — pending

Unresolved source wording: ABS/ABS Fire Retardant/ABS+GF/ABS+CF/PETG/PETG Fire Retardant/ PETG+GF/PLA/ASA/ASA+GF/TPU/PC/PA/PP/PA+CF/PC+CF/PEl+CF etc.

The source material code PEl+CF is ambiguous. Confirm the polymer identity and qualified pellet grades.

Machine weight — pending

Unresolved source wording: 200kg

Public records give different weights. Confirm transport and operating mass for the standard or high-temperature package.

AI-generated FGF sample illustration; not a measured sample from FGF 800 Pro. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for FGF 800 Pro

Measure sustained extrusion, bead stability and warpage for the quoted nozzle and pellet after drying, including the selected chamber condition.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

pellet extrusion / FGF process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the FGF 800 Pro configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation