AI-generated SLA process illustration; not a photograph of SLA 1000 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

SLA · Model reference

EverBen SLA 1000 Pro 3D Printer: specifications and configuration review

Q: What must fit outside the one-metre build?

The source machine outline is 160 × 170 × 243 cm. It does not include removal clearance, drainage, wash equipment or a post-cure unit for a 1000 mm part. Request the full handling and finishing layout.

SLA 1000 Pro: 1000 × 1000 × 600 mm SLA reference with 850 kg first-tank resin and 1630 kg listed machine mass. Filled operating load and large-part handling remain unresolved.

Request this configuration Compare adjacent models ↓

AI-generated SLA process illustration; not a photograph of SLA 1000 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

ProcessSLA resin printing

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for SLA 1000 Pro

Can the two weight entries define the floor load?

The 1630 kg machine and 850 kg resin entries do not define packaging, tank fill state, ancillary equipment or load distribution. Require a filled operating-mass schedule and support-point loads before installation design.

What must fit outside the one-metre build?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: 1000*1000*600mm
Layer setting: 0.05mm~0.2mm
Laser: Solid-state frequency tripled Nd: YVO4
Wavelength: 355nm
Electrical supply: 200-240VAC 50/60Hz,single-phase,10A
Rated load (reference; scope to confirm): 1.8KVA
First-tank resin entry: 850kg

Adjacent configurations

Compare SLA 1000 Pro with SLA 850 Pro and SLA 1200 Pro

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

SLA 1000 Pro / SLA 850 Pro

Reference comparison; unconfirmed fields remain open
Field	SLA 1000 Pro	SLA 850 Pro
Build envelope	10001000600mm	850 × 850 × 500 mm
First-tank resin entry	850kg	527 kg
Machine outline (auxiliaries may be excluded)	160cm(W)170cm(D)243cm(H)	140 cm (W) × 149 cm (D) × 243 cm (H)
Machine mass (check net/gross basis)	1630kg	1470 kg
Rated load (reference; scope to confirm)	1.8KVA	1.5 kVA

SLA 850 Pro: 850 × 850 × 500 mm resin build reference in the same listed machine outline as SLA 800. The first tank rises to 527 kg; cost and output advantages need a shared trial.

Review SLA 850 Pro specifications →

SLA 1000 Pro / SLA 1200 Pro

Reference comparison; unconfirmed fields remain open
Field	SLA 1000 Pro	SLA 1200 Pro
Build envelope	10001000600mm	1200 × 800 × 650 mm
First-tank resin entry	850kg	940 kg
Machine outline (auxiliaries may be excluded)	160cm(W)170cm(D)243cm(H)	198 cm (W) × 177 cm (D) × 230 cm (H)
Machine mass (check net/gross basis)	1630kg	2350 kg
Rated load (reference; scope to confirm)	1.8KVA	Pending confirmation — see this model’s reference issues

SLA 1200 Pro: 1200 × 800 × 650 mm resin build reference, with 940 kg first-tank resin and 2350 kg machine mass. The 2.2 kVA electrical basis remains pending.

Review SLA 1200 Pro specifications →

Reviewed reference record

Basic Parameters for EverBen SLA 1000 Pro 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Max Printing Size: 1000*1000*600mm
Machine Size: 160cm(W)*170cm(D)*243cm(H)
Rated apparent power: 1.8KVA
Machine Weight: 1630kg
First Tank Resin: 850kg
Beam Size (diameter @1/e²): 0.08-0.8mm(Variable Beam)
Max Scanning Speed: 15.0m/s
Layer Thickness: 0.05mm~0.2mm
Accuracy: Pending confirmation — The fixed term in the source accuracy formula has no unit. A signed formula and measurement method are required.
Laser Type: Solid-state frequency tripled Nd: YVO4
Wavelength: 355nm
Power: Resin Surface Power≥300 mw
Variable Beam System: Galvo/Closed-loop
Main structure: Marble recoater frame, marble elevator holder and marble scanning system base
Coating Mode: Intelligent position vacuum recoating
Vertical Resolution Ratio: 0.0005mm
Repeat Positioning Accuracy: ±0.01mm
Motion Control System: Closed-loop
Machine Control Software: Source-listed machine-control or slicing software; current product name, licence, provider, version and compatibility must be confirmed in the controlled quotation.
Input Data File Format: STL/SLC
Operating System: Windows 10
Network Type and Protocol: Ethernet,TCP/IP
Electrical Requirement: 200-240VAC 50/60Hz,single-phase,10A
Ambient Temperature: 20–26 °C (Celsius reference retained; primary unit pending confirmation; inconsistent Fahrenheit text removed)
Relative Humidity: <40%,non-condensing
Machine Warranty: 2 years (including laser) (published reference only; seller, warrantor, start date, coverage and exclusions require written contract confirmation).

Needs configuration confirmation

The source machine outline is 160 × 170 × 243 cm. It does not include removal clearance, drainage, wash equipment or a post-cure unit for a 1000 mm part. Request the full handling and finishing layout. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

Source wording retained for clarification (1 entries; not approved specifications)

Accuracy — pending

Unresolved source wording: ±0.1(L≤100mm); ±0.1%*L(L>100mm)

The fixed term in the source accuracy formula has no unit. A signed formula and measurement method are required.

AI-generated SLA sample illustration; not a measured sample from SLA 1000 Pro. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for SLA 1000 Pro

Build and post-cure the intended one-metre geometry, checking lifting support, drainage, warpage and dimensions at the final inspection condition.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

SLA resin printing process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the SLA 1000 Pro configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation