AI-generated SLA process illustration; not a photograph of SLA 1200 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

SLA · Model reference

EverBen SLA 1200 Pro 3D Printer: specifications and configuration review

SLA 1200 Pro: 1200 × 800 × 650 mm resin build reference, with 940 kg first-tank resin and 2350 kg machine mass. The 2.2 kVA electrical basis remains pending.

Request this configuration Compare adjacent models ↓

AI-generated SLA process illustration; not a photograph of SLA 1200 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

ProcessSLA resin printing

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for SLA 1200 Pro

How does 1200 relate to 1450 and 1700?

These records list the same 800 mm width and 650 mm height with different X lengths. The 1200 outline is 198 × 177 × 230 cm; scanner configuration, true usable volume and complete operating load require a dated revision.

Why does a 10 A supply need clarification?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: 1200 × 800 × 650 mm
Layer setting: 0.05 – 0.2 mm
Laser: Solid-state frequency-tripled Nd:YVO₄
Wavelength: 355 nm
Electrical supply: Pending confirmation — The source 2.2 kVA rating exceeds 200 V × 10 A at the low-voltage end. Confirm the permitted supply range, current and rating boundary.
Rated load (reference; scope to confirm): Pending confirmation — The source 2.2 kVA rating exceeds 200 V × 10 A at the low-voltage end. Confirm the permitted supply range, current and rating boundary.
First-tank resin entry: 940 kg

Adjacent configurations

Compare SLA 1200 Pro with SLA 1000 Pro and SLA 1450 Pro

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

SLA 1200 Pro / SLA 1000 Pro

Reference comparison; unconfirmed fields remain open
Field	SLA 1200 Pro	SLA 1000 Pro
Build envelope	1200 × 800 × 650 mm	10001000600mm
First-tank resin entry	940 kg	850kg
Machine outline (auxiliaries may be excluded)	198 cm (W) × 177 cm (D) × 230 cm (H)	160cm(W)170cm(D)243cm(H)
Machine mass (check net/gross basis)	2350 kg	1630kg
Rated load (reference; scope to confirm)	Pending confirmation — see this model’s reference issues	1.8KVA

SLA 1000 Pro: 1000 × 1000 × 600 mm SLA reference with 850 kg first-tank resin and 1630 kg listed machine mass. Filled operating load and large-part handling remain unresolved.

Review SLA 1000 Pro specifications →

SLA 1200 Pro / SLA 1450 Pro

Reference comparison; unconfirmed fields remain open
Field	SLA 1200 Pro	SLA 1450 Pro
Build envelope	1200 × 800 × 650 mm	1450×800×650 mm
First-tank resin entry	940 kg	Not supplied in this record
Machine outline (auxiliaries may be excluded)	198 cm (W) × 177 cm (D) × 230 cm (H)	222×177×230 cm
Machine mass (check net/gross basis)	2350 kg	2550 kg
Rated load (reference; scope to confirm)	Pending confirmation — see this model’s reference issues	2.2 kVA

SLA 1450 Pro: 1450 × 800 × 650 mm SLA reference from a distinct comparison-table column. The 2.2 kVA entry does not supply missing voltage, phase, current or laser specifications.

Review SLA 1450 Pro specifications →

Reviewed reference record

Basic Parameters for EverBen SLA 1200 Pro 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Max Printing Size: 1200 × 800 × 650 mm
Machine Size: 198 cm (W) × 177 cm (D) × 230 cm (H)
Rated apparent power: Pending confirmation — The source 2.2 kVA rating exceeds 200 V × 10 A at the low-voltage end. Confirm the permitted supply range, current and rating boundary.
Machine Weight: 2350 kg
First Tank Resin: 940 kg
Beam Size (diameter @1/e²): 0.08 – 0.8 mm (Variable Beam)
Max Scanning Speed: 15.0 m/s
Layer Thickness: 0.05 – 0.2 mm
Accuracy: ±0.15 mm (L ≤ 100 mm); ±0.15 % × L (L > 100 mm)
Laser Type: Solid-state frequency-tripled Nd:YVO₄
Wavelength: 355 nm
Power: Resin Surface Power ≥ 300 mW
Variable Beam System: Galvo / Closed-loop
Main Structure: Marble recoater frame, marble elevator holder, marble scanning system base
Coating Mode: Intelligent position vacuum recoating
Vertical Resolution Ratio: 0.0005 mm
Repeat Positioning Accuracy: ±0.01 mm
Motion Control System: Closed-loop
Machine Control Software: Source-listed machine-control or slicing software; current product name, licence, provider, version and compatibility must be confirmed in the controlled quotation.
Input Data File Format: STL / SLC
Operating System: Windows 10
Network Type and Protocol: Ethernet, TCP/IP
Electrical Requirement: Pending confirmation — The source 2.2 kVA rating exceeds 200 V × 10 A at the low-voltage end. Confirm the permitted supply range, current and rating boundary.
Ambient Temperature: 20–26 °C (Celsius reference retained; primary unit pending confirmation; inconsistent Fahrenheit text removed)
Relative Humidity: ≤ 40 %, non-condensing
Machine Warranty: 2 years (including laser) (published reference only; seller, warrantor, start date, coverage and exclusions require written contract confirmation).

Needs configuration confirmation

At the 200 V end of the source range, 10 A single-phase gives 2.0 kVA, below the separate 2.2 kVA rating. Confirm voltage-dependent current, peak demand and auxiliary loads before specifying the supply. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

Source wording retained for clarification (3 entries; not approved specifications)

Rated apparent power — pending

Unresolved source wording: 2.2 kVA

The source 2.2 kVA rating exceeds 200 V × 10 A at the low-voltage end. Confirm the permitted supply range, current and rating boundary.

Electrical Requirement — pending

Unresolved source wording: 200–240 VAC, 50/60 Hz, single-phase, 10 A

The source 2.2 kVA rating exceeds 200 V × 10 A at the low-voltage end. Confirm the permitted supply range, current and rating boundary.

Supply power — pending

Unresolved source wording: 200–240 VAC, 50/60 Hz, single-phase, 10 A

The source 2.2 kVA rating exceeds 200 V × 10 A at the low-voltage end. Confirm the permitted supply range, current and rating boundary.

AI-generated SLA sample illustration; not a measured sample from SLA 1200 Pro. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for SLA 1200 Pro

Validate the intended 1200 mm part and its supports through washing and curing, measuring longitudinal distortion and the full process cycle.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

SLA resin printing process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the SLA 1200 Pro configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation