AI-generated SLA process illustration; not a photograph of SLA 600 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

SLA · Model reference

EverBen SLA 600 Pro 3D Printer: specifications and configuration review

Q: How does 600 differ from 6035 and 650?

6035 lists 600 × 350 × 350 mm and 130 kg of resin. The 650 envelope has a source-unit conflict. Use the width and resin differences to prepare a nesting study; no comparative cycle-time result is published.

SLA 600 Pro: 600 × 600 × 400 mm resin build reference with a 240 kg first-tank entry. Review resin inclusion and measured part accuracy before sizing a production batch.

Request this configuration Compare adjacent models ↓

AI-generated SLA process illustration; not a photograph of SLA 600 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

ProcessSLA resin printing

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for SLA 600 Pro

What does the 240 kg first tank include?

The first-tank figure is a resin quantity reference, separate from the 990 kg machine entry. The resin grade, supply quantity, price inclusion and filled operating load remain open.

How does 600 differ from 6035 and 650?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: 600*600*400mm
Layer setting: 0.05mm~0.2mm
Laser: Solid-state frequency tripled Nd: YVO4
Wavelength: 355nm
Electrical supply: 200-240VAC 50/60Hz,single-phase,10A
Rated load (reference; scope to confirm): 1.5KVA
First-tank resin entry: 240kg

Adjacent configurations

Compare SLA 600 Pro with SLA 6035 Pro and SLA 650 Pro

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

SLA 600 Pro / SLA 6035 Pro

Reference comparison; unconfirmed fields remain open
Field	SLA 600 Pro	SLA 6035 Pro
Build envelope	600600400mm	600350350mm
First-tank resin entry	240kg	130kg
Machine outline (auxiliaries may be excluded)	118cm(W)129cm(D)217cm(H)	118cm(W)99cm(D)217cm(H)
Machine mass (check net/gross basis)	990kg	780kg
Rated load (reference; scope to confirm)	1.5KVA	1.2KVA

SLA 6035 Pro: 600 × 350 × 350 mm narrow-format SLA reference with 130 kg first-tank resin. It differs substantially in width and height from the 600 × 600 × 400 mm SLA 600.

Review SLA 6035 Pro specifications →

SLA 600 Pro / SLA 650 Pro

Reference comparison; unconfirmed fields remain open
Field	SLA 600 Pro	SLA 650 Pro
Build envelope	600600400mm	Pending confirmation — see this model’s reference issues
First-tank resin entry	240kg	255kg
Machine outline (auxiliaries may be excluded)	118cm(W)129cm(D)217cm(H)	118cm(W)129cm(D)217cm(H)
Machine mass (check net/gross basis)	990kg	1000kg
Rated load (reference; scope to confirm)	1.5KVA	1.5KVA

SLA 650 Pro: SLA 650 has an unresolved build-size unit conflict. The table records 255 kg first-tank resin and 1000 kg machine mass; verify the envelope before comparing it with SLA 600.

Review SLA 650 Pro specifications →

Reviewed reference record

Basic Parameters for EverBen SLA 600 Pro 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Max Printing Size: 600*600*400mm
Machine Size: 118cm(W)*129cm(D)*217cm(H)
Rated apparent power: 1.5KVA
Machine Weight: 990kg
First Tank Resin: 240kg
Beam Size (diameter @1/e²): 0.08-0.8mm(Variable Beam)
Max Scanning Speed: 15.0m/s
Layer Thickness: 0.05mm~0.2mm
Accuracy: Pending confirmation — The fixed term in the source accuracy formula has no unit. A signed formula and measurement method are required.
Laser Type: Solid-state frequency tripled Nd: YVO4
Wavelength: 355nm
Power: Resin Surface Power≥300 mw
Variable Beam System: Galvo/Closed-loop
Main structure: Marble recoater frame, marble elevator holder and marble scanning system base
Coating Mode: Intelligent position vacuum recoating
Vertical Resolution Ratio: 0.0005mm
Repeat Positioning Accuracy: ±0.01mm
Motion Control System: Closed-loop
Machine Control Software: Source-listed machine-control or slicing software; current product name, licence, provider, version and compatibility must be confirmed in the controlled quotation.
Input Data File Format: STL/SLC
Operating System: Windows 10
Network Type and Protocol: Ethernet,TCP/IP
Electrical Requirement: 200-240VAC 50/60Hz,single-phase,10A
Ambient Temperature: 20–26 °C (Celsius reference retained; primary unit pending confirmation; inconsistent Fahrenheit text removed)
Relative Humidity: <40%,non-condensing

Needs configuration confirmation

6035 lists 600 × 350 × 350 mm and 130 kg of resin. The 650 envelope has a source-unit conflict. Use the width and resin differences to prepare a nesting study; no comparative cycle-time result is published. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

Source wording retained for clarification (1 entries; not approved specifications)

Accuracy — pending

Unresolved source wording: ±0.1(L≤100mm); ±0.1%*L(L>100mm)

The fixed term in the source accuracy formula has no unit. A signed formula and measurement method are required.

AI-generated SLA sample illustration; not a measured sample from SLA 600 Pro. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for SLA 600 Pro

Place dimensional features across the 600 mm X and Y area, then record support removal and post-cure distortion for the chosen resin.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

SLA resin printing process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the SLA 600 Pro configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation