AI-generated SLA process illustration; not a photograph of SLA 6035 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

SLA · Model reference

EverBen SLA 6035 Pro 3D Printer: specifications and configuration review

Q: What is the tradeoff against SLA 450?

6035 extends the nominal X axis to 600 mm and reduces Y to 350 mm compared with the 450 square platform. Both list 350 mm height and 130 kg resin, but long narrow nesting, recoating and cure behaviour need an actual trial.

SLA 6035 Pro: 600 × 350 × 350 mm narrow-format SLA reference with 130 kg first-tank resin. It differs substantially in width and height from the 600 × 600 × 400 mm SLA 600.

Request this configuration Compare adjacent models ↓

AI-generated SLA process illustration; not a photograph of SLA 6035 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

ProcessSLA resin printing

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for SLA 6035 Pro

Is 6035 another name for SLA 600?

No equivalence is established. The source gives 6035 a 600 × 350 × 350 mm envelope and 130 kg resin entry; SLA 600 lists 600 × 600 × 400 mm and 240 kg. Keep both designations and configurations separate.

What is the tradeoff against SLA 450?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: 600*350*350mm
Layer setting: 0.05mm~0.2mm
Laser: Solid-state frequency tripled Nd: YVO4
Wavelength: 355nm
Electrical supply: 200-240VAC 50/60Hz,single-phase,10A
Rated load (reference; scope to confirm): 1.2KVA
First-tank resin entry: 130kg

Adjacent configurations

Compare SLA 6035 Pro with SLA 450 Pro and SLA 600 Pro

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

SLA 6035 Pro / SLA 450 Pro

Reference comparison; unconfirmed fields remain open
Field	SLA 6035 Pro	SLA 450 Pro
Build envelope	600350350mm	450450350mm
First-tank resin entry	130kg	130kg
Machine outline (auxiliaries may be excluded)	118cm(W)99cm(D)217cm(H)	104cm(W)117cm(D)216cm(H)
Machine mass (check net/gross basis)	780kg	720kg
Rated load (reference; scope to confirm)	1.2KVA	1.2KVA

SLA 450 Pro: 450 × 450 × 350 mm SLA reference with a 130 kg resin entry. Compare its square footprint with the 600 × 350 mm footprint of SLA 6035.

Review SLA 450 Pro specifications →

SLA 6035 Pro / SLA 600 Pro

Reference comparison; unconfirmed fields remain open
Field	SLA 6035 Pro	SLA 600 Pro
Build envelope	600350350mm	600600400mm
First-tank resin entry	130kg	240kg
Machine outline (auxiliaries may be excluded)	118cm(W)99cm(D)217cm(H)	118cm(W)129cm(D)217cm(H)
Machine mass (check net/gross basis)	780kg	990kg
Rated load (reference; scope to confirm)	1.2KVA	1.5KVA

SLA 600 Pro: 600 × 600 × 400 mm resin build reference with a 240 kg first-tank entry. Review resin inclusion and measured part accuracy before sizing a production batch.

Review SLA 600 Pro specifications →

Reviewed reference record

Basic Parameters for EverBen SLA 6035 Pro 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Max Printing Size: 600*350*350mm
Machine Size: 118cm(W)*99cm(D)*217cm(H)
Rated apparent power: 1.2KVA
Machine Weight: 780kg
First Tank Resin: 130kg
Beam Size (diameter @1/e²): 0.08-0.8mm(Variable Beam)
Max Scanning Speed: 15.0m/s
Layer Thickness: 0.05mm~0.2mm
Accuracy: Pending confirmation — The fixed term in the source accuracy formula has no unit. A signed formula and measurement method are required.
Laser Type: Solid-state frequency tripled Nd: YVO4
Wavelength: 355nm
Power: Resin Surface Power≥300 mw
Variable Beam System: Galvo/Closed-loop
Main structure: Marble recoater frame, marble elevator holder and marble scanning system base
Coating Mode: Intelligent position vacuum recoating
Vertical Resolution Ratio: 0.0005mm
Repeat Positioning Accuracy: ±0.01mm
Motion Control System: Closed-loop
Machine Control Software: Source-listed machine-control or slicing software; current product name, licence, provider, version and compatibility must be confirmed in the controlled quotation.
Input Data File Format: STL/SLC
Operating System: Windows 10
Network Type and Protocol: Ethernet,TCP/IP
Electrical Requirement: 200-240VAC 50/60Hz,single-phase,10A
Ambient Temperature: 20–26 °C (Celsius reference retained; primary unit pending confirmation; inconsistent Fahrenheit text removed)
Relative Humidity: <40%,non-condensing
Machine Warranty: 2 years (including laser) (published reference only; seller, warrantor, start date, coverage and exclusions require written contract confirmation).

Needs configuration confirmation

6035 extends the nominal X axis to 600 mm and reduces Y to 350 mm compared with the 450 square platform. Both list 350 mm height and 130 kg resin, but long narrow nesting, recoating and cure behaviour need an actual trial. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

Source wording retained for clarification (1 entries; not approved specifications)

Accuracy — pending

Unresolved source wording: ±0.1(L≤100mm); ±0.1%*L(L>100mm)

The fixed term in the source accuracy formula has no unit. A signed formula and measurement method are required.

AI-generated SLA sample illustration; not a measured sample from SLA 6035 Pro. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for SLA 6035 Pro

Use a long narrow batch spanning the 600 mm axis, and compare post-cure straightness, resin use and accepted batch time with SLA 450.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

SLA resin printing process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the SLA 6035 Pro configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation