AI-generated SLA process illustration; not a photograph of SLA 800 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

SLA · Model reference

EverBen SLA 800 Pro 3D Printer: specifications and configuration review

SLA 800 Pro: 800 × 800 × 500 mm SLA reference, with 500 kg first-tank resin and a 140 × 149 × 243 cm machine outline. Compare directly with the 850 configuration.

Request this configuration Compare adjacent models ↓

AI-generated SLA process illustration; not a photograph of SLA 800 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

ProcessSLA resin printing

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for SLA 800 Pro

Why compare 800 and 850 together?

Both records list the same outer dimensions and 500 mm build height. The 850 increases nominal X/Y to 850 mm and lists 527 kg of resin and 1470 kg machine mass, versus 500 kg and 1370 kg here.

Is the two-year warranty contractual?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: 800 × 800 × 500 mm
Layer setting: 0.05 – 0.2 mm
Laser: Solid-state frequency-tripled Nd:YVO₄
Wavelength: 355 nm
Electrical supply: 200–240 VAC, 50/60 Hz, single-phase, 10 A
Rated load (reference; scope to confirm): 1.5 kVA
First-tank resin entry: 500 kg

Adjacent configurations

Compare SLA 800 Pro with SLA 850 Pro and SLA 600 Pro

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

SLA 800 Pro / SLA 850 Pro

Reference comparison; unconfirmed fields remain open
Field	SLA 800 Pro	SLA 850 Pro
Build envelope	800 × 800 × 500 mm	850 × 850 × 500 mm
First-tank resin entry	500 kg	527 kg
Machine outline (auxiliaries may be excluded)	140 cm (W) × 149 cm (D) × 243 cm (H)	140 cm (W) × 149 cm (D) × 243 cm (H)
Machine mass (check net/gross basis)	1370 kg	1470 kg
Rated load (reference; scope to confirm)	1.5 kVA	1.5 kVA

SLA 850 Pro: 850 × 850 × 500 mm resin build reference in the same listed machine outline as SLA 800. The first tank rises to 527 kg; cost and output advantages need a shared trial.

Review SLA 850 Pro specifications →

SLA 800 Pro / SLA 600 Pro

Reference comparison; unconfirmed fields remain open
Field	SLA 800 Pro	SLA 600 Pro
Build envelope	800 × 800 × 500 mm	600600400mm
First-tank resin entry	500 kg	240kg
Machine outline (auxiliaries may be excluded)	140 cm (W) × 149 cm (D) × 243 cm (H)	118cm(W)129cm(D)217cm(H)
Machine mass (check net/gross basis)	1370 kg	990kg
Rated load (reference; scope to confirm)	1.5 kVA	1.5KVA

SLA 600 Pro: 600 × 600 × 400 mm resin build reference with a 240 kg first-tank entry. Review resin inclusion and measured part accuracy before sizing a production batch.

Review SLA 600 Pro specifications →

Reviewed reference record

Basic Parameters for EverBen SLA 800 Pro 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Max Printing Size: 800 × 800 × 500 mm
Machine Size: 140 cm (W) × 149 cm (D) × 243 cm (H)
Rated apparent power: 1.5 kVA
Machine Weight: 1370 kg
First Tank Resin: 500 kg
Beam Size (diameter @1/e²): 0.08 – 0.8 mm (Variable Beam)
Max Scanning Speed: 15.0 m/s
Layer Thickness: 0.05 – 0.2 mm
Accuracy: ±0.1 mm (L ≤ 100 mm); ±0.1 % × L (L > 100 mm)
Laser Type: Solid-state frequency-tripled Nd:YVO₄
Wavelength: 355 nm
Power: Resin Surface Power ≥ 300 mW
Variable Beam System: Galvo / Closed-loop
Main Structure: Marble recoater frame, marble elevator holder, marble scanning system base
Coating Mode: Intelligent position vacuum recoating
Vertical Resolution Ratio: 0.0005 mm
Repeat Positioning Accuracy: ±0.01 mm
Motion Control System: Closed-loop
Machine Control Software: Source-listed machine-control or slicing software; current product name, licence, provider, version and compatibility must be confirmed in the controlled quotation.
Input Data File Format: STL / SLC
Operating System: Windows 10
Network Type and Protocol: Ethernet, TCP/IP
Electrical Requirement: 200–240 VAC, 50/60 Hz, single-phase, 10 A
Ambient Temperature: 20–26 °C (Celsius reference retained; primary unit pending confirmation; inconsistent Fahrenheit text removed)
Relative Humidity: ≤ 40 %, non-condensing
Machine Warranty: 2 years (including laser) (published reference only; seller, warrantor, start date, coverage and exclusions require written contract confirmation).

Needs configuration confirmation

The source lists two years including the laser, while the 850 record lists one year. Neither establishes the EverBen warrantor, start date, exclusions, labour or service geography; obtain the quoted terms. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

AI-generated SLA sample illustration; not a measured sample from SLA 800 Pro. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for SLA 800 Pro

Use one shared 800 mm nesting file for the 800 and 850 trials, recording accepted parts, resin use, wash/cure time and measurement results.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

SLA resin printing process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the SLA 800 Pro configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation