Send project brief
AI-generated SLM process illustration; not a photograph of SLM D100, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

SLM · Model reference

EverBen SLM D100 3D Printer: specifications and configuration review

SLM D100: Ø120 × 100 mm cylindrical LPBF reference with a single 300 W infrared fibre laser and no substrate preheating. Alloy, gas and output conditions need qualification.

Request this configurationCompare adjacent models ↓

AI-generated SLM process illustration; not a photograph of SLM D100, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

Processmetal LPBF / SLM
Current availabilityPending confirmation
Specification statusNeeds configuration confirmation
Reference reviewed2026-09-08

Configuration decisions

What to resolve for SLM D100

How does the cylindrical D100 compare with M100?

D100 lists Ø120 × 100 mm and a 690 × 720 × 1000 mm machine outline; M100 lists a 100 mm cube. Check the circular nesting boundary and supports rather than comparing the nominal model numbers.

Can the material and gas lists be combined freely?

The source lists several alloys, nitrogen/argon circulation and no substrate preheating. Its 5–15 cm³/h output has no alloy conditions. Require a permitted alloy–gas–preheat–parameter matrix and complete auxiliary scope.

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope
Φ120mm*100mm
Layer setting
0.02~0.1 mm
Laser
300W Infrared Ytterbium-doped Fiber Laser ×1
Material grade / qualification
Stainless steel, cobalt chromium alloy, titanium alloy, tool steel, etc
Electrical supply
220V 50 Hz
Rated load (reference; scope to confirm)
6kW, Single-phase Electricity
Preheat / process temperature
No Substrate Preheating

Adjacent configurations

Compare SLM D100 with SLM M50 Series and SLM M100 Series

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

SLM D100 / SLM M50 Series

Reference comparison; unconfirmed fields remain open
FieldSLM D100SLM M50 Series
Build envelopeΦ120mm*100mmΦ70mm*50mm
Laser300W Infrared Ytterbium-doped Fiber Laser ×1High performance domestic laser 200W (1064nm)
Preheat / process temperatureNo Substrate PreheatingNo Substrate Preheating
Machine outline (auxiliaries may be excluded)690mm * 720mm * 1000mm720mm*810mm*1500mm
Machine mass (check net/gross basis)140kg100kg
Electrical supply220V 50 Hz220V 50 Hz
Rated load (reference; scope to confirm)6kW, Single-phase Electricity1kW, Single Phase

SLM M50 Series: Small cylindrical LPBF reference, Ø70 × 50 mm, with a 200 W source and a tin-powder entry. Conflicting speed and protective-gas claims are withheld.

Review SLM M50 Series specifications →

SLM D100 / SLM M100 Series

Reference comparison; unconfirmed fields remain open
FieldSLM D100SLM M100 Series
Build envelopeΦ120mm*100mm100mm*100mm*100mm
Laser300W Infrared Ytterbium-doped Fiber Laser ×1IPG 500W*1
Preheat / process temperatureNo Substrate PreheatingNo Substrate Preheating
Machine outline (auxiliaries may be excluded)690mm * 720mm * 1000mm735mm *920mm * 1780mm
Machine mass (check net/gross basis)140kg300kg
Electrical supply220V 50 Hz220V 50 Hz
Rated load (reference; scope to confirm)6kW, Single-phase Electricity6kW, Three-phase Electricity

SLM M100 Series: 100 × 100 × 100 mm LPBF reference with one 500 W laser and a corrected 735 × 920 × 1780 mm outline. The 220 V three-phase supply wording needs a wiring basis.

Review SLM M100 Series specifications →

Reviewed reference record

Basic Parameters for EverBen SLM D100 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Build Size
Φ120mm*100mm
External Dimensions
690mm * 720mm * 1000mm
Forming Materials
Stainless steel, cobalt chromium alloy, titanium alloy, tool steel, etc
Powder Supply Method
Top Powder Supply & One-Way Powder Feeding
Printing Accuracy
Pending confirmation — The fixed term in the source accuracy formula has no unit. A signed formula and measurement method are required.
Layer Thickness
0.02~0.1 mm
Protection System
Efficient Protective Gas Circulation System (Nitrogen, Argon)
Supporting Consumables
Stainless Steel Powder, no less than 20kg, with various material process parameter packages
Laser Type
300W Infrared Ytterbium-doped Fiber Laser ×1
Scanning System
SUPERSCAN
Laser Speed
Max 7m/s
Data Processing Software
Voxeldance Additive / Magics (SLC file)
Equipment Control Software
Source-listed machine-control or slicing software; current product name, licence, provider, version and compatibility must be confirmed in the controlled quotation.
Operating System
Windows 10
Data Format
STL/SLC/JOB
Power Supply
220V 50 Hz
Rated Power Consumption
6kW, Single-phase Electricity
Preheat Temperature
No Substrate Preheating
Industrial Control Computer Configuration
Gen i7, 16GB RAM
Forming Efficiency
5~15cm³/h
Relative Humidity
Below 40%, Frost-free
Ambient Temperature
15~30 °C
Equipment Weight
140kg
Needs configuration confirmation

The source lists several alloys, nitrogen/argon circulation and no substrate preheating. Its 5–15 cm³/h output has no alloy conditions. Require a permitted alloy–gas–preheat–parameter matrix and complete auxiliary scope. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

Source wording retained for clarification (1 entries; not approved specifications)
Printing Accuracy — pending

Unresolved source wording: ±0.1(L≤100 mm); ±0.1%*L(L>100 mm)

The fixed term in the source accuracy formula has no unit. A signed formula and measurement method are required.

AI-generated SLM sample illustration; not a measured sample from SLM D100. Material, finish and performance require the benchmark below.
AI-generated SLM sample illustration; not a measured sample from SLM D100. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for SLM D100

Nest the selected part inside the confirmed circular boundary and measure density and mechanical coupons under its approved alloy, gas and no-preheat parameter set.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

metal LPBF / SLM process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the SLM D100 configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation