AI-generated SLM process illustration; not a photograph of SLM M100 Series, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

SLM · Series reference

EverBen SLM M100 Series 3D Printer: specifications and configuration review

SLM M100 Series: 100 × 100 × 100 mm LPBF reference with one 500 W laser and a corrected 735 × 920 × 1780 mm outline. The 220 V three-phase supply wording needs a wiring basis.

Request this configuration Compare adjacent models ↓

AI-generated SLM process illustration; not a photograph of SLM M100 Series, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

Processmetal LPBF / SLM

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for SLM M100 Series

What was corrected in the M100 dimensions?

The source split 920 mm as “92 0mm”. The outer outline now reads 735 × 920 × 1780 mm. The dimensional correction does not resolve service clearance, auxiliary equipment or the separate unitless accuracy formula.

How should 220 V and three-phase power be interpreted?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: 100mm*100mm*100mm
Layer setting: 0.02~0.2 mm
Laser: IPG 500W*1
Material grade / qualification: Stainless steel, cobalt chromium alloy, titanium alloy, tool steel, etc
Electrical supply: 220V 50 Hz
Rated load (reference; scope to confirm): 6kW, Three-phase Electricity
Preheat / process temperature: No Substrate Preheating

Adjacent configurations

Compare SLM M100 Series with SLM D100 and SLM M150 Series

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

SLM M100 Series / SLM D100

Reference comparison; unconfirmed fields remain open
Field	SLM M100 Series	SLM D100
Build envelope	100mm100mm100mm	Φ120mm*100mm
Laser	IPG 500W*1	300W Infrared Ytterbium-doped Fiber Laser ×1
Preheat / process temperature	No Substrate Preheating	No Substrate Preheating
Machine outline (auxiliaries may be excluded)	735mm 920mm 1780mm	690mm * 720mm * 1000mm
Machine mass (check net/gross basis)	300kg	140kg
Electrical supply	220V 50 Hz	220V 50 Hz
Rated load (reference; scope to confirm)	6kW, Three-phase Electricity	6kW, Single-phase Electricity

SLM D100: Ø120 × 100 mm cylindrical LPBF reference with a single 300 W infrared fibre laser and no substrate preheating. Alloy, gas and output conditions need qualification.

Review SLM D100 specifications →

SLM M100 Series / SLM M150 Series

Reference comparison; unconfirmed fields remain open
Field	SLM M100 Series	SLM M150 Series
Build envelope	100mm100mm100mm	150mm150mm150mm
Laser	IPG 500W*1	IPG 500W×1/2 (1064nm)
Preheat / process temperature	No Substrate Preheating	No Substrate Preheating
Machine outline (auxiliaries may be excluded)	735mm 920mm 1780mm	1280mm860mm1780mm
Machine mass (check net/gross basis)	300kg	700kg
Electrical supply	220V 50 Hz	220V 50 Hz
Rated load (reference; scope to confirm)	6kW, Three-phase Electricity	Pending confirmation — see this model’s reference issues

SLM M150 Series: 150 mm cube metal LPBF reference with single- or dual-500 W laser candidates. The 7/9 kW and 20–50 cm³/h entries lack a configuration and alloy mapping.

Review SLM M150 Series specifications →

Reviewed reference record

Basic Parameters for EverBen SLM M100 Series 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Build Size: 100mm*100mm*100mm
External Dimensions: 735mm *920mm * 1780mm
Forming Materials: Stainless steel, cobalt chromium alloy, titanium alloy, tool steel, etc
Powder Supply Method: Double Cylinder One-Way Powder Feeding
Printing Accuracy: Pending confirmation — The fixed term in the source accuracy formula has no unit. A signed formula and measurement method are required.
Layer Thickness: 0.02~0.2 mm
Protection System: Efficient Protective Gas Circulation System (Nitrogen, Argon)
Supporting Consumables: Stainless Steel Powder, no less than 20kg, with various material process parameter packages
Laser Type: IPG 500W*1
Scanning System: SUPERSCAN
Laser Speed: Scanning:1.0~4.0m/s (Recommended); Jumping: 5~7m/s(Recommended); Up to 7.8m/s
Data Processing Software: Voxeldance Additive / Magics (SLC file)
Equipment Control Software: Source-listed machine-control or slicing software; current product name, licence, provider, version and compatibility must be confirmed in the controlled quotation.
Operating System: Windows 10
Data Format: STL/SLC/JOB
Power Supply: 220V 50 Hz
Rated Power Consumption: 6kW, Three-phase Electricity
Preheat Temperature: No Substrate Preheating
Industrial Control Computer Configuration: Gen i7, 16GB RAM
Forming Efficiency: 20~50cm³/h
Relative Humidity: Below 40%, Frost-free
Ambient Temperature: 15-30 °C
Equipment Weight: 300kg

Needs configuration confirmation

The source gives 220 V / 50 Hz and a separate 6 kW three-phase entry. It does not establish line-to-line versus phase voltage, maximum current or connection details; request the wiring and total-load schedule. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

Source wording retained for clarification (1 entries; not approved specifications)

Printing Accuracy — pending

Unresolved source wording: ±0.1(L≤100 mm);±0.1%*L(L>100 mm)

The fixed term in the source accuracy formula has no unit. A signed formula and measurement method are required.

AI-generated SLM sample illustration; not a measured sample from SLM M100 Series. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for SLM M100 Series

Use a 100 mm cube layout with edge and centre coupons for the selected alloy, documenting atmosphere, no-preheat conditions and finished dimensional measurements.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

metal LPBF / SLM process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the SLM M100 Series configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation