EverBen SLA 1450 Pro 3D Printer: specifications and configuration review
SLA 1450 Pro: 1450 × 800 × 650 mm SLA reference from a distinct comparison-table column. The 2.2 kVA entry does not supply missing voltage, phase, current or laser specifications.
AI-generated SLA process illustration; not a photograph of SLA 1450 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.
The retained construction size is 1450 × 800 × 650 mm, machine outline 222 × 177 × 230 cm and machine mass 2550 kg. The 0.05–0.2 mm layer entry came from a comparison table and needs confirmation against the current 1450 revision.
Can the 2.2 kVA entry define installation power?
It describes apparent power only. A laser specification, voltage, phase, frequency, maximum current, initial resin quantity and total operating load are missing. Do not borrow the 1200 or 1700 electrical schedule.
Decision coverage
Selection fields and gaps
Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.
Build envelope
1450×800×650 mm
Layer setting
0.05 – 0.2 mm
Laser
Not supplied in this reference record — request a configuration-specific value.
Wavelength
355nm
Electrical supply
Not supplied in this reference record — request a configuration-specific value.
Rated load (reference; scope to confirm)
2.2 kVA
First-tank resin entry
Not supplied in this reference record — request a configuration-specific value.
Adjacent configurations
Compare SLA 1450 Pro with SLA 1200 Pro and SLA 1700 Pro
Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.
Reference comparison; unconfirmed fields remain open
Field
SLA 1450 Pro
SLA 1200 Pro
Build envelope
1450×800×650 mm
1200 × 800 × 650 mm
First-tank resin entry
Not supplied in this record
940 kg
Machine outline (auxiliaries may be excluded)
222×177×230 cm
198 cm (W) × 177 cm (D) × 230 cm (H)
Machine mass (check net/gross basis)
2550 kg
2350 kg
Rated load (reference; scope to confirm)
2.2 kVA
Pending confirmation — see this model’s reference issues
SLA 1200 Pro: 1200 × 800 × 650 mm resin build reference, with 940 kg first-tank resin and 2350 kg machine mass. The 2.2 kVA electrical basis remains pending.
Reference comparison; unconfirmed fields remain open
Field
SLA 1450 Pro
SLA 1700 Pro
Build envelope
1450×800×650 mm
1700*800*650mm
First-tank resin entry
Not supplied in this record
1300kg
Machine outline (auxiliaries may be excluded)
222×177×230 cm
248cm(W)*169cm(D)*232cm(H)
Machine mass (check net/gross basis)
2550 kg
2780kg
Rated load (reference; scope to confirm)
2.2 kVA
Pending confirmation — see this model’s reference issues
SLA 1700 Pro: 1700 × 800 × 650 mm long-format SLA reference with 1300 kg first-tank resin. The source electrical figures require reconciliation before site planning.
Basic Parameters for EverBen SLA 1450 Pro 3D Printer
Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.
Layer setting
0.05 – 0.2 mm
Wavelength
355nm
Vertical Resolution Ratio
0.0005mm
Repeat Positioning Accuracy
±0.01mm
Ambient Temperature
20–26 °C (Celsius reference retained; primary unit pending confirmation; inconsistent Fahrenheit text removed)
Relative Humidity
≤40%, non-condensing
Machine Warranty
2 years (including laser) (published reference only; seller, warrantor, start date, coverage and exclusions require written contract confirmation).
Construction Size
1450×800×650 mm
Machine Size
222×177×230 cm
Machine Weight
2550 kg
Rated apparent power
2.2 kVA
Needs configuration confirmation
It describes apparent power only. A laser specification, voltage, phase, frequency, maximum current, initial resin quantity and total operating load are missing. Do not borrow the 1200 or 1700 electrical schedule. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.
Source and corrections
Reference status and open fields
Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.
The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.
AI-generated SLA sample illustration; not a measured sample from SLA 1450 Pro. Material, finish and performance require the benchmark below.
Model-specific acceptance
Benchmark to request for SLA 1450 Pro
Use a 1450 mm reference part with end and centre measurement features; record the actual scan configuration and the post-cure dimensional distribution.
The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.
Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.
Next practical step
Resolve the SLA 1450 Pro configuration.
Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.
