AI-generated SLA process illustration; not a photograph of SLA 1700 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

SLA · Model reference

EverBen SLA 1700 Pro 3D Printer: specifications and configuration review

Q: Which electrical and handling figures are open?

The table pairs 2.2 kVA with 200–240 V single-phase 10 A, which does not agree at 200 V on the same basis. Machine mass is listed as 2780 kg and resin as 1300 kg; request the actual loaded condition and rigging plan.

SLA 1700 Pro: 1700 × 800 × 650 mm long-format SLA reference with 1300 kg first-tank resin. The source electrical figures require reconciliation before site planning.

Request this configuration Compare adjacent models ↓

AI-generated SLA process illustration; not a photograph of SLA 1700 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

ProcessSLA resin printing

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for SLA 1700 Pro

What needs proof across the 1700 mm length?

The longer X travel extends the 1200 and 1450 format while retaining 800 mm width and 650 mm height. Scanner count, scan-zone joining, long-part deformation and full-length curing are not documented for this designation.

Which electrical and handling figures are open?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: 1700*800*650mm
Layer setting: 0.05mm~0.2mm
Laser: Solid-state frequency tripled Nd: YVO4
Wavelength: 355nm
Electrical supply: Pending confirmation — The source 2.2 kVA rating exceeds 200 V × 10 A at the low-voltage end. Confirm the permitted supply range, current and rating boundary.
Rated load (reference; scope to confirm): Pending confirmation — The source 2.2 kVA rating exceeds 200 V × 10 A at the low-voltage end. Confirm the permitted supply range, current and rating boundary.
First-tank resin entry: 1300kg

Adjacent configurations

Compare SLA 1700 Pro with SLA 1450 Pro and SLA 2700 Pro

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

SLA 1700 Pro / SLA 1450 Pro

Reference comparison; unconfirmed fields remain open
Field	SLA 1700 Pro	SLA 1450 Pro
Build envelope	1700800650mm	1450×800×650 mm
First-tank resin entry	1300kg	Not supplied in this record
Machine outline (auxiliaries may be excluded)	248cm(W)169cm(D)232cm(H)	222×177×230 cm
Machine mass (check net/gross basis)	2780kg	2550 kg
Rated load (reference; scope to confirm)	Pending confirmation — see this model’s reference issues	2.2 kVA

SLA 1450 Pro: 1450 × 800 × 650 mm SLA reference from a distinct comparison-table column. The 2.2 kVA entry does not supply missing voltage, phase, current or laser specifications.

Review SLA 1450 Pro specifications →

SLA 1700 Pro / SLA 2700 Pro

Reference comparison; unconfirmed fields remain open
Field	SLA 1700 Pro	SLA 2700 Pro
Build envelope	1700800650mm	2700 × 900 × 800 mm
First-tank resin entry	1300kg	2650 kg
Machine outline (auxiliaries may be excluded)	248cm(W)169cm(D)232cm(H)	351 cm (W) × 196 cm (D) × 273 cm (H)
Machine mass (check net/gross basis)	2780kg	3750 kg
Rated load (reference; scope to confirm)	Pending confirmation — see this model’s reference issues	Pending confirmation — see this model’s reference issues

SLA 2700 Pro: 2700 × 900 × 800 mm SLA reference with 2650 kg first-tank resin. Its 3.0 kVA and single-phase 10 A entries conflict, so electrical sizing is pending.

Review SLA 2700 Pro specifications →

Reviewed reference record

Basic Parameters for EverBen SLA 1700 Pro 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Max Printing Size: 1700*800*650mm
Machine Size: 248cm(W)*169cm(D)*232cm(H)
Rated apparent power: Pending confirmation — The source 2.2 kVA rating exceeds 200 V × 10 A at the low-voltage end. Confirm the permitted supply range, current and rating boundary.
Machine Weight: 2780kg
First Tank Resin: 1300kg
Beam Size (diameter @1/e²): 0.08-0.8mm(Variable Beam)
Max Scanning Speed: 15.0m/s
Layer Thickness: 0.05mm~0.2mm
Accuracy: Pending confirmation — The fixed term in the source accuracy formula has no unit. A signed formula and measurement method are required.
Laser Type: Solid-state frequency tripled Nd: YVO4
Wavelength: 355nm
Power: Resin Surface Power≥300 mw
Variable Beam System: Galvo/Closed-loop
Main structure: Marble recoater frame, marble elevator holder and marble scanning system base
Coating Mode: Intelligent position vacuum recoating
Vertical Resolution Ratio: 0.0005mm
Repeat Positioning Accuracy: ±0.01mm
Motion Control System: Closed-loop
Machine Control Software: Source-listed machine-control or slicing software; current product name, licence, provider, version and compatibility must be confirmed in the controlled quotation.
Input Data File Format: STL/SLC
Operating System: Windows 10
Network Type and Protocol: Ethernet,TCP/IP
Electrical Requirement: Pending confirmation — The source 2.2 kVA rating exceeds 200 V × 10 A at the low-voltage end. Confirm the permitted supply range, current and rating boundary.
Ambient Temperature: 20–26 °C (Celsius reference retained; primary unit pending confirmation; inconsistent Fahrenheit text removed)
Relative Humidity: <40%,non-condensing
Machine Warranty: 2 years (including laser) (published reference only; seller, warrantor, start date, coverage and exclusions require written contract confirmation).

Needs configuration confirmation

The table pairs 2.2 kVA with 200–240 V single-phase 10 A, which does not agree at 200 V on the same basis. Machine mass is listed as 2780 kg and resin as 1300 kg; request the actual loaded condition and rigging plan. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

Source wording retained for clarification (4 entries; not approved specifications)

Accuracy — pending

Unresolved source wording: ±0.15(L≤100mm); ±0.15%*L(L>100mm)

The fixed term in the source accuracy formula has no unit. A signed formula and measurement method are required.

Rated apparent power — pending

Unresolved source wording: 2.2KVA

The source 2.2 kVA rating exceeds 200 V × 10 A at the low-voltage end. Confirm the permitted supply range, current and rating boundary.

Electrical Requirement — pending

Unresolved source wording: 200-240VAC 50/60Hz,single-phase,10A

The source 2.2 kVA rating exceeds 200 V × 10 A at the low-voltage end. Confirm the permitted supply range, current and rating boundary.

Supply power — pending

Unresolved source wording: 200-240VAC 50/60Hz,single-phase,10A

The source 2.2 kVA rating exceeds 200 V × 10 A at the low-voltage end. Confirm the permitted supply range, current and rating boundary.

AI-generated SLA sample illustration; not a measured sample from SLA 1700 Pro. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for SLA 1700 Pro

Distribute datum features and thin walls along the full 1700 mm length, retaining pre-cure and post-cure measurements and scan-zone locations.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

SLA resin printing process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the SLA 1700 Pro configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation