AI-generated SLA process illustration; not a photograph of SLA 2700 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

SLA · Model reference

EverBen SLA 2700 Pro 3D Printer: specifications and configuration review

Q: What must the oversized delivery plan include?

The listed machine outline is 351 × 196 × 273 cm, with 3750 kg machine mass and 2650 kg resin. Obtain delivery sections, lifting points, filled operating load, spill containment and a cure/transport plan for 2700 mm parts.

SLA 2700 Pro: 2700 × 900 × 800 mm SLA reference with 2650 kg first-tank resin. Its 3.0 kVA and single-phase 10 A entries conflict, so electrical sizing is pending.

Request this configuration Compare adjacent models ↓

AI-generated SLA process illustration; not a photograph of SLA 2700 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

ProcessSLA resin printing

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for SLA 2700 Pro

Why is the 2700 electrical rating withheld?

At the stated 200–240 V and 10 A, single-phase apparent power is 2.0–2.4 kVA. The separate 3.0 kVA entry cannot describe the same limit. No replacement current or voltage has been inferred.

What must the oversized delivery plan include?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: 2700 × 900 × 800 mm
Layer setting: 0.05 – 0.2 mm
Laser: Solid-state frequency-tripled Nd:YVO₄
Wavelength: 355 nm
Electrical supply: Pending confirmation — The source 3.0 kVA rating exceeds 200–240 V × 10 A on the stated single-phase basis. Confirm the rating boundary, current and wiring schedule.
Rated load (reference; scope to confirm): Pending confirmation — The source 3.0 kVA rating exceeds 200–240 V × 10 A on the stated single-phase basis. Confirm the rating boundary, current and wiring schedule.
First-tank resin entry: 2650 kg

Adjacent configurations

Compare SLA 2700 Pro with SLA 1700 Pro and SLA 1200 Pro

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

SLA 2700 Pro / SLA 1700 Pro

Reference comparison; unconfirmed fields remain open
Field	SLA 2700 Pro	SLA 1700 Pro
Build envelope	2700 × 900 × 800 mm	1700800650mm
First-tank resin entry	2650 kg	1300kg
Machine outline (auxiliaries may be excluded)	351 cm (W) × 196 cm (D) × 273 cm (H)	248cm(W)169cm(D)232cm(H)
Machine mass (check net/gross basis)	3750 kg	2780kg
Rated load (reference; scope to confirm)	Pending confirmation — see this model’s reference issues	Pending confirmation — see this model’s reference issues

SLA 1700 Pro: 1700 × 800 × 650 mm long-format SLA reference with 1300 kg first-tank resin. The source electrical figures require reconciliation before site planning.

Review SLA 1700 Pro specifications →

SLA 2700 Pro / SLA 1200 Pro

Reference comparison; unconfirmed fields remain open
Field	SLA 2700 Pro	SLA 1200 Pro
Build envelope	2700 × 900 × 800 mm	1200 × 800 × 650 mm
First-tank resin entry	2650 kg	940 kg
Machine outline (auxiliaries may be excluded)	351 cm (W) × 196 cm (D) × 273 cm (H)	198 cm (W) × 177 cm (D) × 230 cm (H)
Machine mass (check net/gross basis)	3750 kg	2350 kg
Rated load (reference; scope to confirm)	Pending confirmation — see this model’s reference issues	Pending confirmation — see this model’s reference issues

SLA 1200 Pro: 1200 × 800 × 650 mm resin build reference, with 940 kg first-tank resin and 2350 kg machine mass. The 2.2 kVA electrical basis remains pending.

Review SLA 1200 Pro specifications →

Reviewed reference record

Basic Parameters for EverBen SLA 2700 Pro 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Max Printing Size: 2700 × 900 × 800 mm
Machine Size: 351 cm (W) × 196 cm (D) × 273 cm (H)
Rated apparent power: Pending confirmation — The source 3.0 kVA rating exceeds 200–240 V × 10 A on the stated single-phase basis. Confirm the rating boundary, current and wiring schedule.
Machine Weight: 3750 kg
First Tank Resin: 2650 kg
Beam Size (diameter @1/e²): 0.08 – 0.8 mm (Variable Beam)
Max Scanning Speed: 15.0 m/s
Layer Thickness: 0.05 – 0.2 mm
Accuracy: ±0.15 mm (L ≤ 100 mm); ±0.15 % × L (L > 100 mm)
Laser Type: Solid-state frequency-tripled Nd:YVO₄
Wavelength: 355 nm
Power: Resin Surface Power ≥ 300 mW
Variable Beam System: Galvo / Closed-loop
Main Structure: Marble recoater frame, marble elevator holder, marble scanning system base
Coating Mode: Intelligent position vacuum recoating
Vertical Resolution Ratio: 0.0005 mm
Repeat Positioning Accuracy: ±0.01 mm
Motion Control System: Closed-loop
Machine Control Software: Source-listed machine-control or slicing software; current product name, licence, provider, version and compatibility must be confirmed in the controlled quotation.
Input Data File Format: STL / SLC
Operating System: Windows 10
Network Type and Protocol: Ethernet, TCP/IP
Electrical Requirement: Pending confirmation — The source 3.0 kVA rating exceeds 200–240 V × 10 A on the stated single-phase basis. Confirm the rating boundary, current and wiring schedule.
Ambient Temperature: 20–26 °C (Celsius reference retained; primary unit pending confirmation; inconsistent Fahrenheit text removed)
Relative Humidity: < 40 %, non-condensing
Machine Warranty: 2 years (including laser) (published reference only; seller, warrantor, start date, coverage and exclusions require written contract confirmation).

Needs configuration confirmation

The listed machine outline is 351 × 196 × 273 cm, with 3750 kg machine mass and 2650 kg resin. Obtain delivery sections, lifting points, filled operating load, spill containment and a cure/transport plan for 2700 mm parts. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

Source wording retained for clarification (3 entries; not approved specifications)

Rated apparent power — pending

Unresolved source wording: 3.0 kVA

The source 3.0 kVA rating exceeds 200–240 V × 10 A on the stated single-phase basis. Confirm the rating boundary, current and wiring schedule.

Electrical Requirement — pending

Unresolved source wording: 200–240 VAC, 50/60 Hz, single-phase, 10 A

The source 3.0 kVA rating exceeds 200–240 V × 10 A on the stated single-phase basis. Confirm the rating boundary, current and wiring schedule.

Supply power — pending

Unresolved source wording: 200–240 VAC, 50/60 Hz, single-phase, 10 A

The source 3.0 kVA rating exceeds 200–240 V × 10 A on the stated single-phase basis. Confirm the rating boundary, current and wiring schedule.

AI-generated SLA sample illustration; not a measured sample from SLA 2700 Pro. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for SLA 2700 Pro

Require a full-length demonstration part with distributed dimensional checks, lifting fixtures and post-cure results; document any scan-zone transitions.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

SLA resin printing process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the SLA 2700 Pro configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation