AI-generated SLA process illustration; not a photograph of SLA 450 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

SLA · Model reference

EverBen SLA 450 Pro 3D Printer: specifications and configuration review

Q: How does the installation outline differ?

The 450 lists 104 × 117 × 216 cm and 720 kg; 6035 lists 118 × 99 × 217 cm and 780 kg. These are machine entries, so include unloading, wash/cure space and filled operating condition in the final layout.

SLA 450 Pro: 450 × 450 × 350 mm SLA reference with a 130 kg resin entry. Compare its square footprint with the 600 × 350 mm footprint of SLA 6035.

Request this configuration Compare adjacent models ↓

AI-generated SLA process illustration; not a photograph of SLA 450 Pro, the quoted equipment or a delivered unit. Enclosure, head count and auxiliaries shown do not establish this model's configuration.

ProcessSLA resin printing

Current availabilityPending confirmation

Specification statusNeeds configuration confirmation

Reference reviewed2026-09-08

Configuration decisions

What to resolve for SLA 450 Pro

Which geometry favours the 450 footprint?

The 450 and 6035 records share a 350 mm build height and 130 kg first-tank resin entry. Their 450 × 450 and 600 × 350 mm footprints require different nesting; no equal-job production or resin-cost comparison is available.

How does the installation outline differ?

Decision coverage

Selection fields and gaps

Values below come from this model’s reference table. A pending field must be resolved before it is used for selection; a material-family list does not qualify a grade.

Build envelope: 450*450*350mm
Layer setting: 0.05mm~0.2mm
Laser: Solid-state frequency tripled Nd: YVO4
Wavelength: 355nm
Electrical supply: 200-240VAC 50/60Hz,single-phase,10A
Rated load (reference; scope to confirm): 1.2KVA
First-tank resin entry: 130kg

Adjacent configurations

Compare SLA 450 Pro with SLA 400 Pro and SLA 6035 Pro

Each pair uses the same decision fields. These are source-record differences; output, compatibility and current supply require confirmation for both configurations.

SLA 450 Pro / SLA 400 Pro

Reference comparison; unconfirmed fields remain open
Field	SLA 450 Pro	SLA 400 Pro
Build envelope	450450350mm	400400200mm / 400400300mm
First-tank resin entry	130kg	70kg / 100kg
Machine outline (auxiliaries may be excluded)	104cm(W)117cm(D)216cm(H)	Not supplied in this record
Machine mass (check net/gross basis)	720kg	650kg
Rated load (reference; scope to confirm)	1.2KVA	1.2 kVA

SLA 400 Pro: 400 × 400 mm SLA platform reference with 200 or 300 mm height options and an explicit 355 nm wavelength. Build height, resin fill and electrical phase need pairing.

Review SLA 400 Pro specifications →

SLA 450 Pro / SLA 6035 Pro

Reference comparison; unconfirmed fields remain open
Field	SLA 450 Pro	SLA 6035 Pro
Build envelope	450450350mm	600350350mm
First-tank resin entry	130kg	130kg
Machine outline (auxiliaries may be excluded)	104cm(W)117cm(D)216cm(H)	118cm(W)99cm(D)217cm(H)
Machine mass (check net/gross basis)	720kg	780kg
Rated load (reference; scope to confirm)	1.2KVA	1.2KVA

SLA 6035 Pro: 600 × 350 × 350 mm narrow-format SLA reference with 130 kg first-tank resin. It differs substantially in width and height from the 600 × 600 × 400 mm SLA 600.

Review SLA 6035 Pro specifications →

Reviewed reference record

Basic Parameters for EverBen SLA 450 Pro 3D Printer

Reviewed on 2026-09-08. This is a third-party source record for an EverBen inquiry designation. It does not establish a current signed specification, model mapping or supply authorization.

Max Printing Size: 450*450*350mm
Machine Size: 104cm(W)*117cm(D)*216cm(H)
Rated apparent power: 1.2KVA
Machine Weight: 720kg
First Tank Resin: 130kg
Beam Size (diameter @1/e²): 0.08-0.8mm(Variable Beam)
Max Scanning Speed: 15.0m/s
Layer Thickness: 0.05mm~0.2mm
Accuracy: Pending confirmation — The fixed term in the source accuracy formula has no unit. A signed formula and measurement method are required.
Laser Type: Solid-state frequency tripled Nd: YVO4
Wavelength: 355nm
Power: Resin Surface Power≥300 mw
Variable Beam System: Galvo/Closed-loop
Main structure: Marble recoater frame, marble elevator holder and marble scanning system base
Coating Mode: Intelligent position vacuum recoating
Vertical Resolution Ratio: 0.0005mm
Repeat Positioning Accuracy: ±0.01mm
Motion Control System: Closed-loop
Machine Control Software: Source-listed machine-control or slicing software; current product name, licence, provider, version and compatibility must be confirmed in the controlled quotation.
Input Data File Format: STL/SLC
Operating System: Windows 10
Network Type and Protocol: Ethernet,TCP/IP
Electrical Requirement: 200-240VAC 50/60Hz,single-phase,10A
Ambient Temperature: 20–26 °C (Celsius reference retained; primary unit pending confirmation; inconsistent Fahrenheit text removed)
Relative Humidity: <40%,non-condensing
Machine Warranty: 2 years (including laser) (published reference only; seller, warrantor, start date, coverage and exclusions require written contract confirmation).

Needs configuration confirmation

The 450 lists 104 × 117 × 216 cm and 720 kg; 6035 lists 118 × 99 × 217 cm and 780 kg. These are machine entries, so include unloading, wash/cure space and filled operating condition in the final layout. Current availability, EverBen-to-source model mapping and signed specification revision require confirmation.

Source and corrections

Reference status and open fields

Legacy source record — Model parameter table and overview; reviewed 2026-09-08. Source revision not stated; request a current controlled datasheet and model mapping.

The legacy record does not establish a current manufacturer, supply authorization or EverBen model mapping. Request the current controlled datasheet with your inquiry.

Source wording retained for clarification (1 entries; not approved specifications)

Accuracy — pending

Unresolved source wording: ±0.1(L≤100mm); ±0.1%*L(L>100mm)

The fixed term in the source accuracy formula has no unit. A signed formula and measurement method are required.

AI-generated SLA sample illustration; not a measured sample from SLA 450 Pro. Material, finish and performance require the benchmark below.

Model-specific acceptance

Benchmark to request for SLA 450 Pro

Run a common set of square and elongated parts on the 450 and 6035 layouts, measuring cured dimensions and resin used per accepted batch.

The report should name the machine revision, material lot, parameters, post-processing and measurement method, with raw results and agreed acceptance limits.

Request this benchmark

Further planning

Process, installation and purchasing guidance

SLA resin printing process and material guide · Installation, training and acceptance scope · MOQ, quotation and commercial questions

Request a signed model/configuration mapping, current datasheet, genuine model photographs and a quotation naming the supply and warranty parties.

Next practical step

Resolve the SLA 450 Pro configuration.

Send the part envelope, material grade, quantity and destination with the open fields above. Request the matching specification and acceptance plan with your quotation.

Request a model quotation